Abstract:Natural gas (NG) is an alternative combustible fuel for the transportation sectors due to its clean combustion, small carbon footprint, and, with recent breakthroughs in drilling technologies, increased availability and low cost. Currently, NG is better suited for spark-ignited (SI), as a gasoline replacement in conventional SI engines or as a diesel replacement in diesel engines converted to SI operation. However, the knowledge on the fundamentals of NG flame propagation at conditions representative of modern engines (e.g., at higher compression ratios and/or lean mixtures) is limited. Flame propagation inside an engine can be achieved by replacing the original piston with a see-through one. This study visualized flame activities inside the combustion chamber of an optically-accessible heavy-duty diesel engine retrofitted to NG SI operation to increase the understanding of combustion processes inside such converted engines. Recordings of flame luminosity throughout the combustion period at lean-burn operating conditions indicated that the fully-developed turbulent flame formed from several smaller-scale kernels. These small kernels varied with shapes and locations due to different flow motion around the spark location (including the effect of spark electrodes on the local flow separation), different local temperature, or different energy released in these regions. In addition, the turbulent flame was heavily wrinkled during propagation, despite it was grown from a relatively-circular kernel. Moreover, the intake swirl accelerated the flame propagation process while rotating the turbulent flame during its development. Furthermore, the flame propagation speed reduced dramatically when entering the squish region, while the direction from which the flame first touched the bowl edge changed with individual cycles. The results can help the CFD community to better develop RANS and/or LES simulations of such engines under lean-burn operating conditions.

Effect of combustion chamber shape on CNG engine in-cylinder flow and combustion process

Effect of Bowl-in-Piston Chamber on the Combustion Process in a Stoichiometric Natural-Gas Spark-Ignition Engine

An Experimental Investigation of Early Flame Development in an Optical Spark Ignition Engine Fueled with Natural Gas

Numerical Simulation Of Re-Entrant Bowl Effects On Natural-Gas Spark-Ignition Operation

Optical and Numerical Investigations of Flame Propagation in a Heavy Duty Spark Ignited Natural Gas Engine

Effect of Piston Crevices on 3D Simulation of a Heavy-Duty Diesel Engine Retrofitted to Natural Gas Spark Ignition

Numerical Simulation of Re-Entrant Bowl Effects on Natural Gas SI Operation

Observation of Flame Propagation in a Heavy-Duty Natural-Gas Lean Burn Spark-Ignition Engine

Numerical Investigation of Methane Number and Wobbe Index Effects in Lean-Burn Natural Gas Spark-Ignition Combustion

Effect of Spark Timing on the Combustion Stages Seen in a Heavy-Duty Compression-Ignition Engine Retrofitted to Natural Gas Spark-Ignition Operation

An Experimental Study of the Combustion Process in a Natural-Gas Spark-Ignition Engine

Investigation of Multistage Combustion Inside a Heavy-Duty Natural-Gas Spark-Ignition Engine Using Three-Dimensional Computational Fluid Dynamics Simulations and the Wiebe-Function Combustion Model

Experimental study of pre-chamber jet ignition in a rapid compression machine and single-cylinder natural gas engine

Effects of Chamber Geometry, Hydrogen Ratio and EGR Ratio on the Combustion Process and Knocking Characters of a HCNG Engine at the Stoichiometric Condition

Effect of Key Structure Parameters of Passive Pre-chamber on In-Cylinder Combustion Processes and Emissions within a Gasoline Engine

Experimental investigation of the influence of pre-chamber structural parameters on combustion and emission characteristics of a high compression ratio SI engine

Computational analysis of the scavenging characteristic and optimization of passive pre-chamber

Effect of spark timing on the pre-chamber jet ignition in a lean-burn natural gas engine

Influences of the Control Parameters and Spark Plug Configurations on the Performance of a Natural Gas Spark-Ignition Engine

Numerical Investigation of Pre-Chamber Jet Combustion in a Light-Duty Gasoline Engine

An Investigation into the Design and Performance of Pre-combustion Chamber Jet Igniter