Abstract:Development of a cabbage harvester is an efficient approach to change the traditional way of harvesting cabbage in China. In order to satisfy the ascending demand for agricultural machinery, a self-propelled cabbage harvester was developed and its field working performance was tested. To achieve this project, the investigation of the physical properties of cabbage in Zhejiang and Jiangsu Province became the primary task providing the reference for the design. Then the once-over harvester attached to a self-propelled crawler tractor was designed and manufactured, which included the picking and lifting mechanism, dual-disc cutter, leaf separator and collection device. All parts of the harvesting system were powered hydraulically. The picking device consists of a couple of picking shovels and a reel, and the picking shovels pull the cabbage out of the soil using the forward speed of the harvester while the reel pushes the cabbage at the entrance of lifting mechanism. The lifting mechanism takes a kind of transverse-belt clamping way, which means 2 belts are used to clamp and convey the cabbage to the cutting device. The dual-disc cutter, with 2 contra rotating cutting discs, cuts off the root at the connection area between the corm and the root as well as avoids the unbalance of cutting force. Then, the corm and loose leaves remain up to the leaf separator and the root is discarded after the cutting process. The leaf separator is composed of a leaf-separating belt and a leaf-separating roller. The loose leaves are separated from the corm through the rubbing action and inter-collision between the cabbage and leaf-separating roller. Finally, the cabbage corm is conveyed into the box and the whole harvesting process is finished. The harvesting field tests were conducted in 3 regions including the greenhouse in February, 2015 and the outdoors in April and May, 2015, a total of 5 times. Because of the non-standard planting, 60 cabbages were mainly harvested individually or consecutively for several. The results demonstrated that the harvester exhibited a good capability, feasibility and productivity, which met the preliminary requirements of mechanized harvesting. When operating at the speed of 0.3 m/s, the picking rate of harvester in 2nd field test was 86.7% in the outdoor field, much better than the results in 1st field test in the greenhouse because of the soil humidity. The transverse-belt lifting mechanism presented the stable performance with a success delivery rate of 93.3%. However, the qualified cutting rate was 75% as a consequence of the cabbage size diversity in different mature periods, giving rise to the excessive and insufficient cutting. Furthermore, the qualified leaf-separating rate was 81.7%, and the working parameters of the leaf separator including leaf-separating belt and leaf-separating roller should be optimized based on orthogonal tests. The other 3 field tests with finger-type picking device presented the similar results to the 2nd field test. This task has also urged a new standard to be established for cabbage harvester to test the performance in China. Last but not least, to make the standard of cabbage agronomy is equally important to realize the promise of mechanized harvesting cabbage, such as planting normalization and maturity consistency. The results above revealed the feasibility of design scheme, and the self-propelled cabbage harvester had the ability to harvest cabbages individually, which would be a breakthrough for mechanized harvesting cabbage in China after the further optimization and tests of the prototype.

Research & development on wheat no-till seeders for double cropping area in center China

Design and Experiment of Spiral Discharge Anti-Blocking and Row-Sorting Device of Wheat No-Till Planter

Design and Testing of an Automatic Strip-Till Machine for Conservation Tillage of Corn

Design and Experimental Study of a Bi-Directional Rotating Stubble-Cutting No-Tillage Planter

Irrigation strategies to improve the water use efficiency of wheat–maize double cropping systems in North China Plain

Development and tests of a self-propelled cabbage harvester in China

Design and experiment of a straw clearing mulching no-tillage planter

The regional water-conserving and yield-increasing characteristics and suitability of soil tillage practices in Northern China

Development and experiment of self-propelled cabbage harvester

Analysis on Economic Benefits of "A Plowing,Two Interplanting and Three Harvest" High-efficiency Cultivation Technique in Tengchong County of Yunnan Province

Mission Impossible? Maintaining regional grain production level and recovering local groundwater table by cropping system adaptation across the North China Plain

Efficient Water-Saving Irrigation Solution for Direct Seeding Rice under No-Tillage after Cultivating Wheat

Developments in conservation tillage in rainfed regions of North China

Optimal Design and Discrete Element Method Model Development of the Acute Angle Hoe Opener for No-Till System

The adoption of annual subsoiling as conservation tillage in dryland maize and wheat cultivation in northern China

Soil properties and crop yields after 11 years of no tillage farming in wheat–maize cropping system in North China Plain

Subsoiling before winter wheat cultivation increases photosynthetic characteristics and leaf water-use efficiency of summer maize in a double-cropping system

Impact of Tillage and Crop Residue Management on the Weed Community and Wheat Yield in a Wheat–Maize Double Cropping System

Research on the Utilization Efficiency of Nitrogen by Winter Wheat under Different Water and Fertilizer Regulation and Cultivation Modes

Improvement of Water and Nitrogen Use Efficiencies by Alternative Cropping Systems Based on a Model Approach

Numerical simulation and field tests of minimum-tillage planter with straw smashing and strip laying based on EDEM software