Abstract:Affected by the influence of the attitude variation and vibration of the satellite platform in the process of tracking and pointing,free space optical communication terminal will therefore reduce the tracking precision of the system.In order to improve the system's ability for the purpose of resisting disturbance,on the basis of coarse tracking system,the cascade linear active disturbance rejection controller was put forward.The coarse tracking system used direct current brushless torque motor driving two-dimensional turntable as the actuator,and was controlled by the coarse tracking controller.Analysis of the system disturbance is required,for which the tracking differentiator is applied to extract.With azimuth axis of the two-dimensional turntable as the object,the cascade linear active disturbance rejection controller was applied to position loop and speed loop for the sack of active disturbance compensation through linear extended state observer.Therefore,double isolation of internal and external loop disturbance can be achieved,and the tracking precision shall be improved.The experimental analysis,and a comparison with the proportion integral derivation controller were also included.The research results show that there is a 50％ decrease of standard deviation referred to the tracking error,when inputting 2 Hz,5 Hz and 8 Hz sinusoidal signals with the same disturbance signal simulation.At the same time,the observer's disturbance compensation effect in the circumstance of linear expansion was verified.A high tracking accuracy is still ensured when active disturbance rejection control is not sensitive to the frequency variation of inputted sinusoidal signal with changing frequency.

The Nonlinear Friction NN Compensation of Inter-satellite Optical Communication Coarse Pointing Subsystem

Adaptive Wavelet Network Friction Compensation Of Inter-Satellite Optical Communication Coarse Pointing Subsystem

Robust Non-fragile H∞, Control for Coarse Pointing System of Inter-satellite Optical Communication Terminals

Precision Motion Control of Constrained SISO Nonlinear System Via Direct Optimized Compensation

A compound scheme on parameters identification and adaptive compensation of nonlinear friction disturbance for the aerial inertially stabilized platform

Delay Dependent Robust Non-fragile H∞ Design for Fine Pointing System of Optical Communication

Research on High-Stability Composite Control Methods for Telescope Pointing Systems under Multiple Disturbances

Nonlinear Robust Control of Mobile Satellite Communication System Considering Actuator Dynamic Compensation

Adaptive wavelet neural network friction compensation of mechanical systems

Fuzzy Sliding Mode Control of Nonparallel-ground-track Imaging Satellite with High Precision

Adaptive Dynamic Friction Compensation for an Electro-Optical Platform Inertial Stabilization System

Research on the Compensation Method for CPVSESS with Friction

Research on Nonlinear Attitude Control Algorithm for Upper Stage During Multi-Satellite Disposing

A Composite Control Method Based on Model Predictive Control and a Disturbance Observer for the Acquisition, Tracking, and Pointing System

Disturbance estimation and compensation of free space optical communication coarse tracking system

Hybrid Robust and Optimal Control for Pointing a Staring-Mode Spacecraft

Nonlinear Friction Compensation and Disturbance Observer for a High-Speed Motion Platform

In-Flight Calibration of Lorentz Actuators for Non-Contact Close-Proximity Formation Satellites with Cooperative Control

Influence Analysis of Coupled Motions on Pointing Progress of Intersatellite Optical Communication

Adaptive Neural Finite-Time Control for Space Circumnavigation Mission with Uncertain Input Constraints

Autonomous Pointing Control of a Large Satellite Antenna Subject to Parametric Uncertainty