Abstract:We offer a neural network-based control method to control the vibration of the engineering mechanical arm and the trajectory in order to solve the problem of large errors in tracking the path when the engineering mechanical arm is unstable and under the influence of the outside world. A mechanical arm network is used to perform tasks related to learning the unknown dynamic properties of a engineering mechanical arms keyboard without the need for prior learning. Given the dynamic equations of the engineering mechanical arm, the dynamic properties of the mechanical arm were studied using a positive feedback network. The adaptive neural network management system was developed, and the stability and integrity of the closed-loop system were proved by Lyapunov's function. Engineering mechanical arm motion trajectory control errors were modeled and validated in the Matlab/Simulink environment. The simulation results show that the management of the adaptive neural network is able to better control the desired path of the engineering mechanical arm in the presence of external interference, and the fluctuation range of input torque is small. The PID control has a large error in the expected trajectory tracking of the engineering mechanical arm, the fluctuation range of the input torque is as high as 20, and the jitter phenomenon is more serious. The use of detailed comparisons and adaptive neural network monitoring can perform well in manipulating the trajectory of the engineering mechanical arm. The engineering mechanical arm uses an adaptive neural network control method, in which the control precision of engineering mechanical arm motion trajectory can be improved and the out-of-control phenomenon of mechanical arm motion can be reduced.

A Trajectory Tracking Control Scheme of a Human Arm in the Sagittal Plane

Human Demonstration Trajectory Refinement for Redundant Manipulators.

Control of Antagonistic McKibben Muscles Via a Bio-inspired Approach

Non-linear Sliding Mode Control of the Lower Extremity Exoskeleton Based on Human–robot Cooperation

The Arm Planning with Dynamic Movement Primitive for Humanoid Service Robot

Intuitive Kinematic Control of a Robot Arm via Human Motion

Regulation of LPA receptor function by estrogens.

Neuromechanics-Based Neural Feedback Controller for Planar Arm Reaching Movements

Vibration and Trajectory Tracking Control of Engineering Mechanical Arm Based on Neural Network

Adaptive neural tracking control for upper limb rehabilitation robot with output constraints

Data-Driven Model Predictive Control for Trajectory Tracking With a Robotic Arm

Neural-Learning Trajectory Tracking Control of Flexible-Joint Robot Manipulators with Unknown Dynamics

Intelligent Trajectory Tracking Behavior of a Multi-Joint Robotic Arm via Genetic–Swarm Optimization for the Inverse Kinematic Solution

Trajectory tracking controller of a robotized arm with joint constraints, a direct adaptive gain with state limitations approach

Path Planning Using Fuzzy Logic Control of a 2-DOF Robotic Arm

Active Disturbance Rejection Control Based Sinusoidal Trajectory Tracking for an Upper Limb Robotic Rehabilitation Exoskeleton

Semiparametric Musculoskeletal Model for Reinforcement Learning-Based Trajectory Tracking

Movement-Based Prosthesis Control with Angular Trajectory Is Getting Closer to Natural Arm Coordination

Human–Robot Cooperation Control Strategy Design Based on Trajectory Deformation Algorithm and Dynamic Movement Primitives for Lower Limb Rehabilitation Robots

Cognitive representations of functional interactions with objects

Tracker: Model-based Reinforcement Learning for Tracking Control of Human Finger Attached with Thin McKibben Muscles