Abstract:The inverted pendulum is controlled in this article by using the nonlinear control theory. From classical analytical mechanics, its substructure equation of motion is derived. Because of the inclusion of the restoring forces, the Taylor expansion is employed to facilitate the analysis. An estimated satisfactory periodic solution is obtained with the aid of the modified Homotopy perturbation method. A numerical technique based on the fourth-order Runge-Kutta method is employed to justify the previous solution. On the other hand, a positive position feedback control is developed to dampen the vibrations of an IP system subjected to multi-excitation forces. The multiple time scale perturbation technique of the second order is introduced as a mathematical method to solve a two-degree-of-freedom system that simulates the IP with the PPF at primary and 1:1 internal resonance. The stability of these solutions is checked with the aid of the Routh-Hurwitz criterion. A set of graphs, based on the frequency response equations resulting from the MSPT method, is incorporated. Additionally, a numerical simulation is set up with RK-4 to confirm the overall controlled performance of the studied model. The quality of the solution is confirmed by the match between the approximate solution and the numerical simulation. Numerous other nonlinear systems can be controlled using the provided control method. Illustrations are offered that pertain to implications in design and pedagogy. The linearized stability of IP near the fixed points as well as the phase portraits is depicted for the autonomous and non-autonomous cases. Because of the static stability of the IP, it is found that its instability can be suppressed by the increase of both the generalized force as well as the torsional constant stiffness of the spring. Additionally, the presence of the magnetic field enhances the stability of IP.

Stabilization Of The Inertia Wheel Pendulum By Time-Delayed State Feedback

Stabilization of the double inverted pendulum based on discrete-time model predictive control.

Memoryless State Feedback Stabilization for Discrete Switched Systems with Time Delay

State feedback stabilization of uncertain discrete linear impulsive systems

A Recursive Design Method for Stabilization of the Inertia Wheel Pendulum

Stabilize the planar single inverted pendulum based on LQR.

DESIGNING OF THE STATE FEEDABACK STABILIZING CONTROLLER OF UNCERTAIN DYNAMIC SYSTEMS WITH TIME-VARYING DELAYS

Design Of High-Gain-Observer-Based State Feedback Controller For Positive Time-Delay System

Logic-Based Switching Nested Saturation Control for Inverted Pendulum

Design, Implementation, and Control of a Wheel-Based Inverted Pendulum

Designated‐time stabilizing strategy for a class of time‐varying nonlinear systems and its application to pendulum system

An Extension of the Feedback Linearization Method in the Control Problem of an Inverted Pendulum on a Wheel

Output feedback stabilization of linear systems with time-varying delayed states and controls

Using the Delayed Feedback Control and Saturation Control to Suppress the Vibration of the Dynamical System

Adaptive stabilization of time-delay feedforward nonlinear systems

Discrete-Time State-Feedback Controller with Canonical Form on Inverted Pendulum (on a cart)

Dynamical analysis of an inverted pendulum with positive position feedback controller approximate uniform solution

Design of Output-Based Finite-Time Convergent Composite Controller for a Class of Perturbed Second-Order Nonlinear Systems

Nonlinear Control of Inertial Wheel Pendulum and Its Implementation Based on STM32

A Constructive Self-Balancing Controlled Lagrangian For Wheeled Inverted Pendulum

Speed And Orientation Control Of A Two-Coaxial-Wheeled Inverted Pendulum