Abstract:A trans-media vehicle is a new type of equipment that can adapt to two environments, water and air, to maintain optimal hydrodynamic and aerodynamic performance. However, no matter what kind of trans-media vehicle, its dynamics are much more complicated when traversing the interface of the medium, as the parameters are time-varying due to the change in ambient medium and vehicle attitudes. In order to improve the stability and performance of the trans-media vehicle in complex environments, an accurate mathematical model is established to characterize the dynamics of the trans-media vehicle in this process in this study. The time-varying hydrodynamic coefficients with different attitudes or depths are obtained using computational fluid dynamics software. The mathematical model is solved iteratively using a Runge–Kutta solver to calculate the dynamic response. A prototype of trans-media vehicle is fabricated, and motion experiments are performed in the pool. The experimental results confirm the effectiveness of the established model and lay the foundation for further controller design, providing a reference for the dynamic modeling of other similar equipment operating in complex environments. The primary novelty of this study lies in the fact that the established dynamic model considers the complex interaction between the attitude of the trans-media vehicle and the inherent different properties of water and air and utilizes computational fluid dynamics software to accurately obtain time-varying coefficients under different attitudes and depths. This approach not only recognizes the criticality of orientation-dependent hydrodynamic coefficients but also incorporates their temporal variations, which were often overlooked in previous studies.

The Resistance Performance of a Dish-Shaped Underwater Vehicle

Hydrodynamic Characteristics of a Dish-Shaped Underwater Vehicle

Research on Hydrodynamics of Trans-Media Vehicles Considering Underwater Time-Varying Attitudes

Boat Trial Validation and Resistance Prediction of a 36-Foot Hydrofoil Catamarans Using CFD

Application CFD to Compare Submarine Hull Forms

Simulation study on the hydrodynamic resistance and stability of a disk-shaped autonomous underwater helicopter

A numerical study of resistance and viscous flow around typical benchmark surface ship hull

Research on Underwater Vehicle Based on Multiphase Flow Control

Research on Factors of a Flow Field Affecting Catamaran Resistance Calculation

Numerical Study on Hydrodynamic Coefficient Estimation of an Underactuated Underwater Vehicle

Resistance Calculation and Motion Simulation for Deep Sea Open-Framed Remotely Operated Vehicle Based on Hydrodynamics Test

A Numerical Study on the Resistance Prediction of a Medium Speed Craft

Resistance and flow field of a submarine in a density stratified fluid

Numerical study of the cavitating flows over underwater vehicle with large angle of attack

A Study on Hydrodynamic Characteristics of a Planing Hull by CFD Simulation and Modified M-S Method

Experimental and Numerical Investigation on the Resistance Characteristics of a High-Speed Planing Catamaran in Calm Water

Research on Mesh Generation Effecting Resistance Calculation

Numerical calculation and analysis of resistance performance of planing craft combining Savitsky method and overset grid technology

Overview of Research Progress on Numerical Simulation Methods for Turbulent Flows Around Underwater Vehicles

The Numerical Simulation of a Towing Cylinder Based on Immersed Body Boundary Method

A Numerical Calculation of Resistance of an Inland Large Self-propulsion Cutter Suction Dredger in Shallow Water