Abstract:This study investigated the effect of temperature and atmosphere on the grindability of the semicoke prepared via a mid–low temperature pyrolysis of low-rank Shenmu coal, analyzed the variation in its grinding characteristics with the increase of ball grinding duration, and explored the influence mechanism of the pyrolysis conditions on the grindability of semicoke based on the pyrolysis process and semicoke structure evolution. The results show that as the pyrolysis temperature increases (400–700 °C), grindability and grinding mechanism of the semicoke change significantly; the grindability first increases and then decreases with the increase of the pyrolysis temperature. As the grinding duration increased, high-Hardgrove grindability index (HGI) semicoke underwent intensive bulk grinding at a specific grinding time. Additionally, the varying contents of the proximate analysis during devolatilization are not the main cause of the varying HGI during pyrolysis. Using thermogravimetric and thermomechanical analyses, the optimal grindability of the semicoke was found to occur at the transition stage of the pyrolysis to pyrocondensation reactions (approximately 600 °C). During the transition, the intense pyrolysis reaction led the semicoke to have abundant pores and cracks, a highly disordered chemical structure, and low matrix hardness. The porous semicoke which has high grindability first underwent surface grinding; subsequently, the loose cores were more prone to bulk grinding, whereby the optimal grindability was obtained. HGIs of the semicoke prepared in the reductive atmospheres such as H2, CO and CH4 are lower than that of the semicoke prepared in N2 atmosphere at the same pyrolysis temperature. Moreover, the reductive atmospheres inhibited pore development in the semicoke and made its carbon structure more ordered, which densified the structure and decreased the grindability of the semicoke.

Influence of Retorting Temperature on Combustion Characteristics and Kinetic Parameters of Oil Shale Semicoke

Study of the combustion mechanism of oil shale semicoke in a thermogravimetric analyzer

Two-dimensional Combustion Modelling and Experimental Research on Oil Shale Semicoke

Effects of retorting conditions on pore structure of oil shale semi coke

Low-temperature co-current oxidizing pyrolysis of oil shale: Study on the physicochemical properties, reactivity and exothermic characters of semi-coke as heat generation donor

Effects of pyrolysis temperature and atmosphere on grinding properties of semicoke prepared from Shenmu low-rank coal

STUDY ON COMBUSTION PROPERTY OF MIXTURE OF OIL SHALE AND HESHAN COAL

Combustion Behavior and Thermochemical Treatment Scheme Analysis of Oil Sludges and Oil Sludge Semicokes

Effects of Heating Rate, Particle Size, Aerobic Atmosphere, and Flow Rate on the Pyrolysis Characteristics of Huadian Oil Shale

Combustion kinetics study of oil shale semi-coke

Effects of composition and pore evolution on thermophysical properties of Huadian oil shale in retorting and oxidizing pyrolysis

Pyrolysis characteristics of oil shale semi-coke and its extracted bitumen

The Impact of Medium-level Temperature Pyrolysis on Semicoke Combustion Reactivity

Optimization of temperature parameters for the autothermic pyrolysis in-situ conversion process of oil shale

Modeling Study of Combustion Process of Oil Shale Semicoke in a Circulating Fluidized Bed Boiler

Kinetic study on the pyrolysis behavior of Huadian oil shale via non-isothermal thermogravimetric data

Effects of pyrolysis temperature on pore structure and combustion characteristics of high-moisture Indonesia lignite semi-coke

Catalytic Effects on Combustion Behavior of Oil Shale: Thermal Conversion, Kinetic, Mechanism Analyses

Effect of the Pyrolysis Temperature on the Grindability of Semi-cokes Produced by Two Kinds of Low-Rank Coals

Effective Diffusivity of Oxygen in the Ash Layer of Huadian Oil Shale Semicoke

Thermal Behavior of Oil Shale Pyrolysis under Low-Temperature Co-Current Oxidizing Conditions