Abstract:In previous studies, it was found that there exists a minimum flame spread rate under a certain range of sample widths for steady burning horizontal flame spread. While this was hypothesized to occur due to a transition between convectively-dominated to radiation-dominated flame spread, no measurements were performed to quantify this process. This paper presents a detailed experimental study investigating sample width and thickness effects on steady horizontal flame spread, including detailed measurements of the components of radiation, convection, and conduction. Water-cooled heat flux gauges, R-type micro-thermocouples traversed through the gas phase, and K-type thermocouples embedded in the solid phase were all used to deduce these heat transfer components. Results show that convective heat transfer decreases with increasing sample width as the shape of the flame front is on average farther from the fuel surface, while radiation increases as the view factor from the fire to unignited fuel increases with larger sample size. Conduction measured within the fuel sample is, as expected, confirmed to be negligible. Comparing a combination of these components, the total heat flux first decreases as the competition between radiation and convection changes, followed by steadily increasing heat fluxes as the width of the sample increases. Heat feedback also influences the sample pyrolysis rate, so there was a coupled response following this trend. The apparent dip followed by an increase in total heat flux can now explain why a period of minimum flame spread rate exists. Modification of an existing theory also matches experimental results very closely. Finally, a dimensionless heat-release rate for different sample configurations is used to scale the dimensionless flame heights with a power-law correlation having exponents 0.39 for Q* >1 and 0.6 for Q* <1, closely resembling the 2/5 and 2/3 predicted by Zukoski's model.

Heat Release Rate Model of Lining Materials

Experimental Study on Effect of Ceiling on Upward Flame Spread over Poly(Methyl Methacrylate) Sheets

Estimating the Longitudinal Maximum Gas Temperature Attenuation of Ceiling Jet Flows Generated by Strong Fire Plumes in an Urban Utility Tunnel

Heat Fluxes Under The Ceiling Induced By Wall Fires With Various Burner Aspect Ratios In A Channel

Experimental investigation on the characteristics and propagation of fire inside subway train

Experimental Study and Physical Modeling of Ceiling Temperature and Heat Flux Profiles by Wall-Attached Fires in Inclined Tunnels

Heat Transfer Mechanisms in Horizontal Flame Spread over Wood and Extruded Polystyrene Surfaces

A Model for Ceiling Flame Spread

Sample Width and Thickness Effects on Upward Flame Spread over PMMA Surface.

Heat flux and flame spread rate of discrete PMMA in concave building facade with window intervals

Experimental Study on Behavior of Sidewall Fires at Varying Height in a Corridor-Like Structure

Width Effects on Downward Flame Spread over Poly(methyl Methacrylate) Sheets

Rapid prediction of fire-induced heat flux on the liners of horseshoe and circular tunnels with longitudinal ventilation at critical velocity

A Numerical Model for Flame Spread along Combustible Flat Solid with Charring Material with Experimental Validation of Ceiling Flame Spread and Upward Flame Spread

The Experimental Measuring of Vertical Flame Spread Speed

Analysis and Flamelet Modelling for Laminar Pulverised Coal Combustion Considering the Wall Effect

Establishment of an enhanced wall function using the heat transfer analogy method for internal combustion engines

Heat Transfer to an Unconfined Ceiling from an Impinging Buoyant Diffusion Flame

Width Effect on A Vertical Rpu Flame Spread with A Middle Linear Ignition

Heat Flux Profile Upon Building Facade with Side Walls Due to Window Ejected Fire Plume: an Experimental Investigation and Global Correlation

Experimental Analysis on Heat Release Rate of Materials