Abstract:Thick-coal-seam with complex structures and thick-hard roof in the initial mining phase pose various challenges, including a long weighting interval, strong rock pressure, poor top coal caving performance (TCCP), and significant coal loss. These problems directly affect the safety and efficiency of the mining operations. This study employs the principles of elastic thin plates and ellipsoidal bodies to unravel the formation mechanism of strong rock pressure in thick-hard roof and the influence of parting on the TCCP. In addition, a hydraulic fracturing technique is proposed for safe-efficient recovery during the initial mining phase. The reliability of this technique is verified through numerical simulations and field experiments. The research findings reveal the following. (1) The primary causes of strong rock pressure in the mining face are attributed to a long weighting interval and wide collapse range of the main roof, and the weighting interval is primarily influenced by the thickness and tensile strength of the main roof. (2)The key factor affecting the TCCP is the cantilever beam structure formed by the fracture of the thick-hard parting, as it intersects the ellipsoidal body during coal caving. The simultaneous fracturing of both the top coal and roof can reduce the weighting interval on the working face. This process effectively decreased the strength of the thick-hard parting within the top coal, while simultaneously enhancing its load strength and eliminating the cantilever structure resulting from the parting fracture. It not only reduces the first weighting intensity but also promotes the early and proper coal release, thereby enhancing the TCCP and ensuring safe-efficient mining during the initial mining phase. (3) Aiming at the difference in the strengths of the top coal and roof, a graded hydraulic fracturing technique and system were proposed. Fracturing boreholes with a diameter of 60 mm, spacing of 10 m, and height of 20.85 m, which can economically and effectively ensure the fracturing results. Field applications have demonstrated that fractured coal and rocks in fracturing areas exhibit well-developed fractures. During the initial mining phase, the weighting interval in the working face was reduced by 20 m, resulting in a decrease in the overburden pressure and 26.9% reduction in the lumpiness of the top coal. Additionally, the recovery rate increased by 31.19%.

Technique of top-coal caving method with vibration and its application

Application of an Automated Top Coal Caving Control System: The Case of Wangjialing Coal Mine

Innovative solid waste backfilling technology for top coal caving mining: analysing top coal movement and recovery optimisation

Motion Mechanisms for Top Coal and Gangue Blocks in Longwall Top Coal Caving (LTCC) with an Extra-Thick Seam

Vibration response difference of caving mechanism under coal rock impact based on mechanical–hydraulic coupling

Analysis of coal gangue recognition capability based on vibration characteristics of the tail beam and experimental study on coal gangue recognition in fully mechanized top coal caving

Experimental and numerical investigation on coal drawing from thick steep seam with longwall top coal caving mining

A review of coal gangue identification research-application to China's top coal release process

An Effective Method for Longwall Automation in Thin Coal Seam.

Precise detection of coal and gangue based on natural γ-ray

Movement and deformation characteristics of overlying rock mass in deep coal seam

Numerical modelling of loose top coal and roof mass movement for a re-mined seam using the top coal caving method

Analysis and Engineering Practice of Factors Affecting Top-Coal Recovery in a Large Dip Coal Seam

Study on the Residual Coal Distribution and the Improving Measures

Selection Principle and Development Status of Thick Seam Mining Methods in China

A Study of the Top-Coal-Drawing Law of Steeply Inclined and Extremely Thick Coal Seams in the Wudong Coal Mine

Safety and high-recovery mechanisms and application research for initial mining of thick-coal-seam with complex structure and thick-hard roof

Analysis Of Overlying Strata Movement And Behaviors In Caving And Solid Backfilling Mixed Coal Mining

Fracture Mechanics Model of Fully Mechanized Top Coal Caving of Shallow Coal Seams and Its Application

Vibration Response Analysis of Hydraulic Support Based on Real Shape Coal Gangue Particles

Systematic Theory and Method Applied to Solve Complicated Coal Mining Problems Under Three Circumstances