Abstract:SiC layer was prepared in an industrial scale spout fluidized bed by chemical vapor deposition. The density of SiC coating was about 3.18 g/cm(3). High temperature oxidation experiments were carried out at different temperatures from 800 to 1600 degrees C. The microstructure and composition were characterized using different methods, including mass change weighing, XRD, EDS and SEM. It was found that the weight gain of SiC coating layer was not obvious below 1200 degrees C, and subsequent mass gain gradually increased with increasing temperature, reaching 10% at 1600 degrees C. High-magnification SEM results show that the oxidation began from the surface and gradually formed punctate distribution of the oxide. Small crystal structure (similar to micron) of the SiC surface was very clear at 1000 degrees C, and this crystal structure disappeared gradually at high temperatures, forming oxides of Si in the SiC surface. There was a stacking fault stress due to the different thermal expansion coefficients and elastic modulus of SiC and Si oxides, leading to the gradual formation of cracks around the punctates. With increasing temperature, the crack further increased the oxidation rate of SiC, and finally the formed Si oxides layer fell off from the particles. It can be seen clearly that the layer was peeling when the temperature was increased to 1400 degrees C. Increasing the temperature to 1600 degrees C, the SiC coating was oxidized completely into a honeycomb structure, with obvious sintering of SiC. XRD analysis shows that there was a growing SiO2 peaks from 1400 degrees C, indicating that surface oxidation was significant. EDS results shows that the oxygen content in the coating surface gradually increased with increasing temperature. Semi-quantitative analysis shows that the surface was close to SiO2 at 1600 degrees C.

Research on Oxidation of CaS under High Temperature

Research on CaS Oxidation Reaction with Thermogravimetric Analysis

Experimental Study of Decomosition Behavior of CaSO4 in Different Atmospheres

Kinetics of Reaction Between CaS and CaSO4 under N2 Atmosphere

The Study Of Decomposition Of Calcium Sulfate With Compound Molecule At High Temperature

Research on Behavior of Sulfation Product at High Temperature

Experimental Study of the Pyrolysis Path of CaSO3·1/2H2O

On the Intrinsic High Temperature Calcium Oxide-Sulfur Dioxide Reaction Using the Vacuum Thermogravimetric Analysis Technique.

High Temperature Oxidation of Fe-Cr Alloys in Atmospheres Containing 2.0 % SO2+5.0 % O2

Sulfation Performance of CaO under Circulating Fluidized Bed Combustion-Like Condition

Experimental Study on Preparation of Calcium Oxide by Coal Reduction of Calcium Sulfate in Carbon Dioxide Atmosphere

High Temperature Adsorption of SO2 on Mixed Oxides Derived from CaAl Hydrotalcite-Like Compounds

Experimental Investigation on Sulfur Transformation During Coal Steam Gasification with Ca-based Absorbent

Study of Sulfur-Fixing Characteristics of Sulphoaluminate in Different Atmosphere at High Temperature

High Temperature Oxidation Behavior of SiC Coating Materials

The Study of Calcium Sulfate Decomposition by Experiments Under O2/CO2 Atmosphere

DTA & TG measurement and analysis of CaS-CaSO4 system

Ca2+ Cation Diffusion Through Caso4 Product Layer During Sulfur Retained Reaction With Cao

Oxidation of Ca-α-SiAlON Powders Prepared by Combustion Synthesis

Study on Kinetics of Desulfurization Reaction by Cao Particles

High temperature oxidation behavior of reaction-bonded silicon carbide