Abstract:The gas-phase HCl oxidation was studied over bulk and supported Cr2O3-based catalysts by means of kinetic experiments in a fixed-bed reactor at ambient pressure and variable temperature, inlet O2/HCl ratio, and contact time. Cr2O3 exhibited high activity for Cl2 production. X-ray diffraction of the used catalysts detected no phase change. Temperature-programmed reduction with hydrogen and X-ray photoelectron spectroscopy showed that the surface of the fresh catalyst contains chromium species in oxidation state (III) as well as higher oxidation states (V and VI) while that of the used sample features the reduction of Cr5+/Cr6+ and comprises a little amount of chlorine. Coupling the catalytic and characterisation data over Cr2O3 with activity tests over CrO3, a redox cycle is proposed in which chromium species shift between Cr3+ and Cr5+ + Cr6+. The positive dependence of the HCl conversion on the inlet O2 concentration suggests that catalyst re-oxidation is rate limiting. SiO2 was identified as a better carrier for Cr2O3 than Al2O3 and TiO2-anatase, as it favours the formation of Cr2O3 nanoparticles rather than (unstable) isolated chromate species. However, all the supported catalysts suffered from severe deactivation due to substantial chromium loss. The deactivation mechanism is assigned to the in situ formation of the highly volatile CrO2Cl2 from Cr6+ species and CrO2(OH)2 from both Cr3+ and Cr6+ species. The deactivation rate can be reduced, though not suppressed, by applying a high O2 excess in the feed mixture, thus indicating that the deactivation route via the oxychloride might be predominant. The features observed represent critical reasons justifying the restricted industrial implementation of chromium-based catalysts for HCl oxidation.

Conversion of Hydrogen Chloride to Chlorine in a Two-zone Circulating Fluidized Bed Reactor

Conversion of Hydrogen Chloride to Chlorine by Catalytic Oxidation in a Two-Zone Circulating Fluidized Bed Reactor

Numerical Study on the Process of Chemical Looping Hydrogen Production with Multiple Circulating Fluidized Bed Reactors

Understanding the Catalytic Oxidation of Hydrogen Chloride to Chlorine from Thermodynamics and Reaction Kinetics

Sustainable utilization of chlorine via converting HCl to Cl2 over a robust copper catalyst

Gas-Phase Catalytic Hydrochlorination of Acetylene in A Two-Stage Fluidized-Bed Reactor

Production Process of Chlorine from HCl by Catalytic Oxidation

Studies on ethylene oxychlorination III. Hot model test in a fluidized bed

Simulation and Analysis of Fixed-Bed Reactor for Hydrochlorination of Acetylene

Industrial Chlorinated Organic Removal with Elimination of Secondary Pollution: A Perspective

Efficient mercury removal in chlorine-free flue gas by doping Cl into Cu2O nanocrystals

The Impact of Hydrochloric Acid on the Catalytic Destruction Behavior of 1,2-Dichlorbenzene and PCDD/Fs in the Presence of VWTi Catalysts

Experimental Study on Hydrogenation of SiCl4 to SiHCl3 in a Stirred Bed Reactor

Kinetic aspects and deactivation behaviour of chromia-based catalysts in hydrogen chloride oxidation

Efficient Catalytic Oxidation of HCl to Recycle Cl2 over the CuO–CeO2 Composite Oxide Supported on Y Type Zeolite

Elimination of C–Cl Bonds by a Homogeneous Conversion with Sufficient H2: An Attempt for the Control of Dioxin Emission in Municipal Solid Waste Gasification

Performance of CuCl2 Solution on Washing Regeneration of Activated Carbon for Mercury Removal in Syngas

An Efficient Cu-K-La/γ-Al2O3 Catalyst for Catalytic Oxidation of Hydrogen Chloride to Chlorine

Sustained-release of Interlayer Chloride in Iron Oxychloride for Mercury Oxidation from Industrial Flue Gas

High-Temperature HCl Removal with Sorbents in a Fixed-Bed Reactor

Recombination of Hydrogen and Oxygen in Fluidized Bed Reactor with Different Gas Distributors