Abstract:AIMS: First, the aim of the study was to determine whether irreversible electroporation (IRE) is associated with heat generation in the liver and pancreas at clinical (≤1,500 V/cm) and supraclinical (>1,500 V/cm) electroporation settings; second, to assess the risk of thermal tissue damage in and adjacent to the treated volume in highly perfused versus moderately perfused parts of both organs; third, to investigate the influence of perfusion and of the presence and the orientation of a metal stent on the maximal thermal elevation (ΔTSession,max) in the tissue during an IRE session at fixed IRE settings, and finally, to determine whether the maximum temperature elevation within the IRE-subjected organ during an IRE treatment (single or multiple sessions) is reflected in the organ's surface temperature.METHODS: The aims were investigated in 12 case studies conducted in five female Landrace pigs. Several IRE settings were applied for lateral (2), triangular (3), and rectangular (4) electrode configurations in the liver hilum, liver periphery, pancreas head, and pancreas tail. IRE series of 10-90 pulses were applied with pulse durations that varied from 70 μs to 90 μs and electric field strengths between 1,200 V/cm and 3,000 V/cm. In select cases, a metal stent was positioned in the bile duct at the level of the liver hilum. Temperatures were measured before, during, and after IRE in and adjacent to the treatment volumes using fiber optical temperature probes (temperature at the nucleation centers) and digital thermography (surface temperature). The occurrence of thermal damage was assumed to be at temperatures above 50 °C (ΔTSession,max ≥ 13 °C relative to body temperature of 37 °C). The temperature fluctuations at the organ surface (ΔTLocSurf) were compared to the maximum temperature elevation during an IRE treatment in the electroporation zone. In select cases, IRE was applied to tissue volumes encompassing the portal vein (PV) and a constricted and patent superior mesenteric vein (SMV) to determine the influence of the heatsink effect of PV and SMV on ΔTSession,max.RESULTS: The median baseline temperature was 31.6 °C-36.3 °C. ΔTSession,max ranged from -1.7 °C to 25.5 °C in moderately perfused parts of the liver and pancreas, and from 0.0 °C to 5.8 °C in highly perfused parts. The median ΔTLocSurf of the liver and pancreas was 1.0 °C and 10.3 °C, respectively. Constricting the SMV in the pancreas head yielded a 0.8 °C higher ΔTSession,max. The presence of a metal stent in the liver hilum resulted in a ΔTSession,max of 19.8 °C. Stents parallel to the electrodes caused a ΔTSession,max difference of 4.2 °C relative to the perpendicular orientation.CONCLUSIONS: Depending on IRE settings and tissue type, IRE is capable of inducing considerable heating in the liver and pancreas that is sufficient to cause thermal tissue damage. More significant temperature elevations are positively correlated with increasing number of electrode pairs, electric field strength, and pulse number. Temperature elevations can be further exacerbated by the presence and orientation of metal stents. Temperature elevations at the nucleation centers are not always reflected in the organ's surface temperature. Heat sink effects caused by large vessels were minimal in some instances, possibly due to reduced blood flow caused by anesthesia.RELEVANCE FOR PATIENTS: Appropriate IRE settings must be chosen based on the tissue type and the presence of stents to avoid thermal damage in healthy peritumoral tissue and to protect anatomical structures [Table: see text].

Study on the thermal effects of biological tissues during electroperforation

Study, on the optical-thermal response and dynamic thermal damage of bio-tissue during laser thermotherapy

Measurement and Analysis of the Thermal Conductivity of Porcine Thoracic Aortain Vitro

The biothermomechanical behaviour of skin tissue under electromagnetic heating

Bio-thermal response and thermal damage in biological tissues with non-equilibrium effect and temperature-dependent properties induced by pulse-laser irradiation

Analyses on the Dynamic Process of Tissue Electroporation Based on Feedback Signal of Measurement Pulse

Numerical simulation of heat transfer properties of skin tissue acted on repetitive laser irradiation

Numerical Simulation on Phase Change Heat Transfer Process of Biological Tissue in Cryosurgery

A numerical investigation of the electric and thermal cell kill distributions in electroporation-based therapies in tissue

Study on the Low-Power Tissue Cutting of Electrosurgery Assisted with Heat

Influences of supra-physiological temperatures on microstructure and mechanical properties of skin tissue.

An Experimental Study on Low-Temperature Plasma Tissue Ablation and Its Thermal Effect

Safety assessment of electrosurgical electrodes by using mini pig tissue

Evaluation of thermal effects of surgical energy devices: ex vivo study

Comparative healing of swine skin following incisions with different surgical devices

Thermodynamic profiling during irreversible electroporation in porcine liver and pancreas: a case study series

Study on Temperature of Liver and Tumor under High Frequency Nanosecond Pulsed Field

Experimental characterization and numerical modeling of tissue electrical conductivity during pulsed electric fields for irreversible electroporation treatment planning

Numerical Calculation for Effectively Simulating the Electric Field in Electroporated Tissue

Multi-parametric Study of Temperature and Thermal Damage of Tumor Exposed to High-Frequency Nanosecond-Pulsed Electric Fields Based on Finite Element Simulation.

Electrical And Thermal Analyses Of Catheter-Based Irreversible Electroporation Of Digestive Tract