Production of Phenolic-Rich Bio-Oil from Catalytic Fast Pyrolysis of Biomass Over Tailored Fe-Based Catalysts
Shuangxia Yang,Xiaodong Zhang,Feixia Yang,Baofeng Zhao,Lei Chen,Laizhi Sun,Fanjun Meng,Hongyu Si,Xinping Xie
DOI: https://doi.org/10.1166/jbmb.2020.1944
2020-04-01
Journal of Biobased Materials and Bioenergy
Abstract:The objective of this study is to catalytically upgrade fast pyrolysis vapors of sawdust using various Fe-based catalysts for producing phenolic-rich bio-oil by analytical pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) technique. A variety of parameters, including support characteristic, calcination temperature, pyrolysis temperature, as well as the catalyst-to-biomass ratio during the pyrolysis process were evaluated for their effects on product distribution of bio-oil. GC-MS analysis showed that compared to Fe–Mg and Fe–Al catalysts, the developed Fe–Ca catalyst significantly promoted the formation of phenols and its derivatives. The phenolic concentration declined with increasing calcination temperature and pyrolysis temperature, while increased monotonically along with increasing catalyst-to-biomass ratio. The phenolics concentration was high upto 81% (peak area) under optimum conditions of calcination temperature of 500 °C, pyrolysis temperature of 600 °C and catalyst-to-biomass ratio of 10. At higher catalyst-to-biomass ratio of 20, phenolics (88.03% in peak area) and hydrocarbons (including 7.86% of aromatics and 4.1% aliphatics) were the only two components that can be detected, with all the acids, aldehydes and ketones completely eliminated. This indicated the excellent capability of developed Fe–Ca catalyst in promoting the decomposition of lignin in biomass to generate phenolic compounds and meanwhile inhibiting the devolatilization of holocellulose.
energy & fuels,materials science, biomaterials,chemistry, applied