Abstract:A new method for measuring the retardation of waveplates with high precision is brought forward.The measured waveplate is placed between polarizer and analyzer,and rotates uniformly under the control of stepper motor.The phase retardation can be calculated with the least square method fitting the curve of emergent light intensity variation with the azimuth angle of waveplate.Based on the analysis,an experimental system is established to measure the retardation.Four parts,including stability of the system,retardation range for measuring,nonlinearity of the detector,the main error sources of the system are analyzed.It is found that λ/2 waveplate cannot be measured in this system;higher stability can be obtained when the azimuth angle of analyzer ranges from-38° to 38° and the sampling interval is less than 10°;the detector has large second-order nonlinear effect;the measurement precision is mainly affected by the uncertainty of azimuth angle of waveplate and analyzer;repeatability of the system is within 0.1° except for the areas near 0°,180° and 360°.The measurement precision of the system is almost constant in visible range.

Laser Feedback Technique for Precise Retardation Measurements

Measurement Method for Optical Retardation Based on the Phase Difference Effect of Laser Feedback Fringes.

A Novel Method To Enhance The Sensitivity For Two-Degrees-Of-Freedom Straightness Measurement

Measurement of phase retardation of waveplate online based on laser feedback.

Error Source and Its Elimination in Phase Retardation Measurement of Wave Plate Based on Laser Feedback

Phase retardation measurement by analyzing flipping points of polarization states in laser with an anisotropy feedback cavity

Angle Measurement with Laser Feedback Instrument.

Approach for the Measurement of Phase Retardation of Wave Plates Based on Laser Frequency Splitting Technology

Method for the Measurement of Phase Retardation of Any Wave Plate with High Precision

Measurement of phase retardation of optical multilayer films based on laser feedback system

Thickness and refractive-index measurement of birefringent material by laser feedback technique.

Methods for optical phase retardation measurement: A review

Multi-Wavelength Conversion Based on Single Wavelength Results in Phase Retardation Measurement

Measurement of Retardations of Arbitrary Wave Plates by Laser Frequency Splitting

Wave Plate Phase Retardation Measurement on Contact Block Based on Optical Feedback

Displacement Measurement Based on Polarization Hopping of Laser with Optical Feedback

Phase Retardation Measurement with Least Square Fitting Method

Experimental and theoretical study of displacement measurement based on frequency modulation optical feedback in a birefringence dual frequency laser

Polarisation Control Through an Optical Feedback Technique and Its Application in Precise Measurements

Laser Feedback Interferometry Based on Phase Difference of Orthogonally Polarized Lights in External Birefringence Cavity

Measurement of small intracavity phase anisotropy in a laser based on optical feedback