Abstract:A peculiar nanostructure consisting of nitrogen-doped, carbon-encapsulated (N-C) SnO2@Sn nanoparticles grafted on three-dimensional (3D) graphene-like networks (designated as N-C@SnO2@Sn/3D-GNs) has been fabricated via a low-cost and scalable method, namely an in situ hydrolysis of Sn salts and immobilization of SnO2 nanoparticles on the surface of 3D-GNs, followed by an in situ polymerization of dopamine on the surface of the SnO2/3D-GNs, and finally a carbonization. In the composites, three-layer core-shell N-C@SnO2@Sn nanoparticles were uniformly grafted onto the surfaces of 3D-GNs, which promotes highly efficient insertion/extraction of Li(+). In addition, the outermost N-C layer with graphene-like structure of the N-C@SnO2@Sn nanoparticles can effectively buffer the large volume changes, enhance electronic conductivity, and prevent SnO2/Sn aggregation and pulverization during discharge/charge. The middle SnO2 layer can be changed into active Sn and nano-Li2O during discharge, as described by SnO2 + Li(+) → Sn + Li2O, whereas the thus-formed nano-Li2O can provide a facile environment for the alloying process and facilitate good cycling behavior, so as to further improve the cycling performance of the composite. The inner Sn layer with large theoretical capacity can guarantee high lithium storage in the composite. The 3D-GNs, with high electrical conductivity (1.50 × 10(3) S m(-1)), large surface area (1143 m(2) g(-1)), and high mechanical flexibility, tightly pin the core-shell structure of the N-C@SnO2@Sn nanoparticles and thus lead to remarkably enhanced electrical conductivity and structural integrity of the overall electrode. Consequently, this novel hybrid anode exhibits highly stable capacity of up to 901 mAh g(-1), with ∼89.3% capacity retention after 200 cycles at 0.1 A g(-1) and superior high rate performance, as well as a long lifetime of 500 cycles with 84.0% retention at 1.0 A g(-1). Importantly, this unique hybrid design is expected to be extended to other alloy-type anode materials such as silicon, germanium, etc.

Nano-sized Sn/MWNTs and MWNTs Served As the Anode of Lithium Ion Battery

SnS2 Nanoflakes Decorated Multiwalled Carbon Nanotubes As High Performance Anode Materials for Lithium-Ion Batteries

Nanocomposites As Anode for Lithium-Ion Battery

Facile Fabrication of Binder-free Metallic Tin Nanoparticle/Carbon Nanofiber Hybrid Electrodes for Lithium-ion Batteries

Facile Synthesis of Uniform Mwcnt@Si Nanocomposites As High-Performance Anode Materials for Lithium-Ion Batteries

Mo-Doped SnO2 Nanoparticles Embedded in Ultrathin Graphite Nanosheets as a High-Reversible-Capacity, Superior-Rate, and Long-Cycle-Life Anode Material for Lithium-Ion Batteries

Multiwalled Carbon Nanotubes Anchored With Sns2 Nanosheets As High-Performance Anode Materials Of Lithium-Ion Batteries

Carbon Nanotubes Connecting and Encapsulating MoS2-Doped SnO2 Nanoparticles as an Excellent Lithium Storage Performance Anode Material

Coating of multi-walled carbon nanotube with SnO2 films of controlled thickness and its application for Li-ion battery

In-situ synthesized carbon-coated Sn–SnO2 nanoparticles embedded in carbon nanotubes on Cu foam as anode material for lithium-ion batteries

Nano Sn-SnO x Embedded in Multichannel Hollow Carbon Nanofibers: Microstructure, Reversible Lithium Storage Property and Mechanism

The nanocomposites of carbon nanotube with Sb and SnSb0.5 as Li-ion battery anodes

Nanoscale SnS with and without carbon-coatings as an anode material for lithium ion batteries

Evaluation of Sn Nanowire Encapsulated Carbon Nanotube for a Li-Ion Battery Anode by DFT Calculations

Uniform-loaded SnS2/single-walled carbon nanotubes hybrid with improved electrochemical performance for lithium ion battery

Ordered SnO nanoparticles in MWCNT as a functional host material for high-rate lithium-sulfur battery cathode

Facile encapsulation of nanosized SnO2 particles in carbon nanotubes as an efficient anode of Li-ion batteries

Electrochemical Lithiation and De-Lithiation of Carbon Nanotube-Sn2sb Nanocomposites

Research for SnS/C nanocomposite as lithium-ion battery anode materials

Nitrogen-Doped Carbon-Encapsulated SnO2@Sn Nanoparticles Uniformly Grafted on Three-Dimensional Graphene-like Networks as Anode for High-Performance Lithium-Ion Batteries

Simple Synthesis of Metallic Sn Nanocrystals Embedded in Graphitic Ordered Mesoporous Carbon Walls As Superior Anode Materials for Lithium Ion Batteries