Abstract:Bundle-type mutil-walled carbon nanotubes (MWCNTs) composite electrode is the first investigation and publication for the supercapacitor application. According to the thermogravimetric analysis results, as-synthesized BCNTs are considered as the electrode materials for supercapacitors and electrochemical double-layer capacitor in this study. The Brunauer–Emmett–Teller specific surface area of as-prepared bundled carbon nanotubes (BCNTs) is 95.29 m2/g given to a type III isotherm and H3 hysteresis loops. Slow scanning rates promote and enhance to achieve high Cb because of the superior conductivity of CNT bundles and one side close-layered Ni/Mg/Mo alloy inside the BCNT-based electrode and facile electron diffusivity between electrolyte and electrode. The specific capacitance Cs (1,560 F/g) is nearly equal to the maximum specific capacitance, which the BCNT-based composite electrode can actually be able to charge or fill in. The maximum energy density value is 195 Wh/kg with corresponding power density values of 0.21 kW/kg. Furthermore, the active 3D BCNTs material fabricated electrode enhances to contact the electrolyte directly and decreases the ion diffusion limitation. Electrochemical impedance spectroscopy spectrum summarized as the low-frequency area controls by mass transfer limitation, and the high-frequency area dominates by charge transfer of kinetic control. After 2,000 consecutive cyclic voltammetry sacnings and galvanostatic charge-discharge cycles at a current density of 1.67 A/g performs, the specific capacitance retentions of 3D BCNTs electrodes achieved 128.2 and 77.3%, respectively. Three-dimensional BCNT composite electrodes exhibit good conductivity and low charge transfer resistance, which is beneficial to fast charge transfer between the BCNTs electrode materials and electrolytes.

Study Of Activated Bamboo-Shaped Multiwall Carbon Nanotubes As Supercapacitor Electrodes

TaC nanowire/activated carbon microfiber hybrid structures from bamboo fibers

Preparation of Three-Dimensional Carbon Microtube/Carbon Nanotube Composites and Their Application in Supercapacitor

Control of Nano Grains and Wide Carbocyclic Layer Space of Forming Active Carbon with Extraordinary Capacitance Characteristics in Supercapacitors

Activated biomass carbon made from bamboo as electrode material for supercapacitors

Porous bamboo‐like CNTs prepared by a simple and low‐cost steam activation for supercapacitors

Bamboo-derived porous carbons for Zn-ion hybrid supercapacitors

Nitrogen-functionalized Microporous Carbon Nanoparticles for High Performance Supercapacitor Electrode

Electrochemical properties of MnO2/activated carbon nanotube composite as an electrode material for supercapacitor

Nitrogen, Boron and Fluorine Tri-Doped Carbon Nanotubes on Carbon Cloth As the Electrode Materials for Supercapacitors

Electrochemical performance of various activated carbon-multi-walled carbon nanotubes symmetric supercapacitor electrodes in aqueous electrolytes

Three-dimensional bundle-like multiwalled carbon nanotubes composite for supercapacitor electrode application

Sulfur-doped carbon nanotubes with hierarchical micro/mesopores for high performance pseudocapacitive supercapacitors

Factors influencing MnO2/multi-walled carbon nanotubes composite's electrochemical performance as supercapacitor electrode

Electrochemical Double-Layer Capacitors Based on Activated Bamboo-Shaped Carbon Nanotubes

Nitrogen-doped porous carbon derived from cross-cutting bamboo for high-performance supercapacitors by one-pot ball milling method

Integrating carbon nanotube into activated carbon matrix for improving the performance of supercapacitor

Dielectric barrier discharge low-temperature plasma modification of bamboo charcoal for supercapacitor applications

Co/P co-doped bamboo-based woodceramics with a sandwich structure modified by carbon nanotube electrodeposition as supercapacitor electrodes

A Study of Activated Carbon Nanotubes As Double-Layer Capacitors Electrode Materials

Investigations of Activated Carbon from Different Natural Sources for Preparation of Binder-Free Few-Walled CNTs/Activated Carbon Electrodes