Abstract:Purpose - The purpose of this paper is to discuss motion planning about crossing obstacles and welding trajectory for a new-model mobile obstacle-crossing welding robot system. The robot can cross the obstacle in this way that one of the three adhesion mobile parts is pulled off the ground in turn. An optimal obstacle-crossing approach needs to be studied to improve the welding efficiency.Design/methodology/approach - According to the characteristics of this mobile welding robot, two methods for crossing obstacles are compared. A special method is used for obstacle-crossing and welding. The kinematic model is established. By the optimization method, the optimum parameters for crossing obstacles are calculated. The welding speed when the robot is crossing the obstacle is very important, so its value must be in a certain range. Finally, the tracks of the wheels when the robot is crossing the obstacle are analyzed in order to observe the obstacle-crossing process.Findings - According to the analysis, the maximum speed of the vehicle in the obstacle-crossing is determined. When crossing the obstacle, the robot can do welding simultaneously. The welding speed cannot exceed a certain value. In the obstacle-crossing process, the tracks of the wheels can reflect the process. According to the obtained conclusion, the obstacle-crossing experiments are successfully completed, and the welding effect is good. The results can prove that the proposed method is feasible. Research limitations/implications The speed of obstacle-crossing is not very large. It has some relationships with the lifting speed of the wheels, which is determined by the quality of drive motor. More efficient robot must be developed to meet the needs of industrial robot. Practical implications Based on the excellent obstacle-crossing and welding capabilities, the robot with the new mechanism has a widely applying prospect in the field of welding and inspecting large equipment.Originality/value - The obstacle-crossing approach has certain innovation. The way that the robot can maintain continuous welding when crossing the obstacle is of a great significance.

The establishment and simulation of control model for trackless autonomous crawling all -position arc welding robot

Application of Trackless Autonomous Crawling All-Position Arc Welding Robot in Shipbuilding

Crawl type all position welding robot for large scale work piece

Design and Performance Analysis of a Tracked Wall-Climbing Robot for Ship Inspection in Shipbuilding

Crawl Type All Position Arc Welding Robot

Study on Crawl Type All Position Arc Welding Robot with Modern Arc Welding Control

Arc Length Control Study for Crawl-Type Electrogas Arc Welding Robot

The System Design Of An Autonomous Mobile Welding Robot

Harmony Control of the Welding Track in Crawling Robot

The control of a mobile robot to find the weld joint automatically

Research on Flexible Rail Type All-Position Welding Robot

Motion navigation for arc welding robots based on feature mapping in a simulation environment

Realization of Rectangular Fillet Weld Tracking Based on Rotating Arc Sensors and Analysis of Experimental Results in Gas Metal Arc Welding

Mobile Welding Robot System Based on Rotating Arc Sensor Applied for Large Fillet Welding Seam Tracking.

A Stable Tracking Control Method for an Autonomous Welding Mobile Robot

Mobile Welding Robot and Hybrid Controller

Kinematics Modeling for Arc Welding Robot

Online obstacle avoidance path planning and application for arc welding robot

Rectangular Fillet Weld Tracking by Robots Based on Rotating Arc Sensors in Gas Metal Arc Welding

Design and analysis of welding inspection robot

Motion Planning For A New-Model Obstacle-Crossing Mobile Welding Robot