Abstract:Metal corrosion is an important economic problem globally. One of the best ways to protect metal surfaces from corrosion is by the use of corrosion inhibitors, especially surfactants. This study assesses anticorrosion properties of three inhibitor compounds (S1, S2, and S3) of ethoxylate sulfanilamide containing 2, 10, and 20 units of ethylene oxide on carbon steel in 1 M HCl solution. The anticorrosive performance of S1, S2, and S3 was studied using potentiodynamic polarization (PDP), electrochemical impedance spectroscopy (EIS), adsorption isotherm, surface tests (scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) spectroscopy, and X-ray diffraction (XRD) analysis), and computational studies (density functional theory (DFT) and molecular dynamics (MD) simulations) within the concentration range of 10–6 to 10–2 M at 30 ± 2 °C. The results of the methods used indicate that increasing the concentration of the inhibitor compounds improves the effectiveness of inhibition (from 50.9 to 98%), whereas the inhibition efficiency order for ethoxylated sulfanilamide compounds is S2 > S3 > S1 with the highest inhibiting efficiency, respectively, of 98.0, 95.0, and 90.0% for 10–2 M. Also, PDP indicated that S1, S2, and S3 inhibitors act as mixed-type inhibitors and their adsorption obeys the Langmuir adsorption isotherm model. Surface tests show that the studied compounds can significantly inhibit acid attack via chemical adsorption on the metal. Furthermore, all of the chemical descriptors derived from DFT indicate that the three inhibitors are quite well adsorbed by the adhesion centers on the CS surface. The three compounds' molecular geometries and electronic structures were calculated using quantum chemical calculations. Using theoretical computations, the energy difference between the highest occupied molecular orbital and the lowest occupied molecular orbital has been determined to represent chemical reactivity and kinetic stability of a composition.This article has not yet been cited by other publications.

Adsorption behavior of dodecylamine and its effect on the wettability and corrosion of carbon steel

Corrosion Inhibition and Adsorption Behavior of (3-Aminopropyl)-triethoxysilane on Steel Surface in the Simulated Concrete Pore Solution Contaminated with Chloride

Adsorption behavior of dodecylbenzyldimethyl ammonium bromide on iron surface and its synergistic inhibition effect on cinnamaldehyde in hydrochloric acid

The inhibition performance of heterocyclic compounds on Q235 steel in methanol/formic acid medium: Experimental and theory

Corrosion inhibition performance of synergistic inhibitors on Q235 steel in methanol/formic acid medium

Effect of Concentration and Addition of Ions on the Adsorption of Sodium Dodecyl Sulfate on Stainless Steel Surface in Aqueous Solutions

Electrochemical and Theoretical Study of Corrosion Inhibition on Carbon Steel in 1M HCl Medium by 1,10-Bis(4-Amino-3-Methyl-1,2,4-Triazole-5-Thioyl)Decane

Effect of anion on the corrosion inhibition of cationic surfactants and a mechanism study

Synergistic Inhibition Properties and Microstructures of Self-Assembled Imidazoline and Phosphate Ester Mixture for Carbon Steel Corrosion in the CO2 Brine Solution

Corrosion Inhibition Effect of N-(4-diethylaminobenzyl) Quaternary Ammonium Chitosan for X80 Pipeline Steel in Hydrochloric Acid Solution

CORROSION INHIBITION EFFECT OF BISQUATERNARY AMMONIUM SALT OF ROSIN GROUP TO MILD STEEL IN HYDROCHLORIC ACID

Investigation of Corrosion Inhibitor Adsorption on Mica and Mild Steel Using Electrochemical Atomic Force Microscopy and Molecular Simulations

The impact of novel diamine based aqueous and water lean solvents on the corrosion of carbon steel

Preparation of methylacridinium iodides self-assembled monolayers and its anti-corrosion properties for mild steel in seawater: Experimental and computational studies

Study on corrosion and inhibition mechanism in H2S aqueous solutions - viii. The adsorption behavior of imidazoline derivates on the mild steel electrodes in H2S solutions

Unraveling the corrosion inhibition mechanism of triazine derivatives for carbon steel: Experimental and theoretical insights into interfacial adsorption

Synergism of alkylbenzene sulfonate and cetyltrimethylammonium bromide on corrosion inhibition of carbon steel in CO2 -saturated solutions

Electrochemical Impedance and X-ray Photoelectron Spectroscopic Studies of the Inhibition of Mild Steel Corrosion in Acids by Cyclohexylamine

Tribological Properties of Dithiocarbamate Triazine and Its Competitive Adsorption Behavior Compared to T701 on the Corrosion Inhibition of Q235 Steel

Anticorrosion Effect of Ethoxylate Sulfanilamide Compounds on Carbon Steel in 1 M Hydrochloric Acid: Electrochemical and Theoretical Studies

Corrosion Behavior of Carbon Steel in Diethylenetriamine Solution for Post-combustion CO2 Capture.