Abstract:In most industrial sectors, large coal-fired boilers are a source of carbon and pollutant emissions, so it is important to carry out combustion adjustment and optimize energy-saving operation of coal-fired boilers. Traditional combustion adjustment relies on human intervention, but manual adjustment is difficult to achieve synergistic optimization of NOx and thermal efficiency at the same time, so there is a large adjustment space for boiler combustion optimization. Artificial intelligence technology can explore the potential of combustion optimization from boiler operation data. Currently, the boiler combustion optimization method based on supervised learning modeling and optimization algorithms has good optimization effect and high application value. At present, there are problems such as the combination of dynamic model and optimization algorithm is difficult and the optimization time is long, etc. This paper adopts feature classification and multi-model coupling to build a static-dynamic composite prediction model of boiler performance indicators, dynamic prediction model of boiler thermal efficiency and nitrogen oxides (NOx) is established by using long short-term memory (LSTM) and one-dimensional convolutional neural network (1D_CNN). The model is categorized into static and dynamic models based on the input features, and the dynamic model is coupled with BP neural network to establish a static-dynamic composite prediction model and further couples the proximal policy optimization (PPO) reinforcement learning algorithm to establish a boiler in-place optimization strategy. Through the experimental validation of 5619 test cases, the strategy successfully achieves 63.5 % co-optimization of NOx and thermal efficiency, with thermal efficiency increase ranging from 0-0.61 % and NOx reduction ranging from 0-65 mg/m3. Meanwhile, comparing the optimization effect of the PPO algorithm with that of the genetic algorithm (GA) shows that the PPO strategy has a more significant effect on NOx reduction while keeping the thermal efficiency optimized. Moreover, the online decision-making speed of the PPO strategy is much higher than that of the GA, with an average time consumption of only 0.015 s, while the GA requires about 3 min for a single optimization, which indicates that the combustion optimization strategy of the PPO algorithm coupled with the composite prediction model has a significant advantage in realizing high-efficiency and accurate optimization.

An Optimized BP Network Model Using Genetic Algorithm for Predicting the Ignition-Stability Index of Pulverized Coal

Optimized BP Network Model for Predicting Igniting Temperature of Pulverized-Coal Based on Genetic Algorithm

Combustion Optimization Study of Pulverized Coal Boiler Based on Proximal Policy Optimization Algorithm

Predicting coal ash fusion temperature based on its chemical composition using ACO-BP neural network

Prediction and Analysis of Pulverized Coal Ignition Temperature Based on a Least Square Supportive Vector Machine

Predicting Coal Ash Fusion Temperature Using Hybrid of Ant Colony Algorithm and BP Neural Network

Multi-objective Optimization of Operating Parameters Based on Neural Network and Genetic Algorithm in the Blast Furnace

Ignition Temperature and Activation Energy of Power Coal Blends Predicted with Back-Propagation Neural Network Models

PRELIMINARY ESTABLISHMENT OF MODEL FOR JUDGING DIFFICULTY AND EASINESS OF PULVERISED COAL IGNITION

Maximum burning rate and fixed carbon burnout efficiency of power coal blends predicted with back-propagation neural network models

The Investigation of Carbon Content in Fly Ash for a BP Neural Network-based Pulverized Coal-fired Boiler

Optimizing pulverized coal combustion performance based on ANN and GA

Prediction of BP neural network and preliminary application for suppression of low‐temperature oxidation of coal stockpiles by pulverized coal covering

Establishment of Combustion Stability Index of Pulverized-Coal

Optimized Neural Network to Predict the Experimental Minimum Period of Coal Spontaneous Combustion

Optimization of BF pulverized coal blending based on TOPSIS method

Correction To: Thermal Analysis and Kinetic Modeling of Pulverized Coal Combustion Accompanied with Coke Breeze

Data-Driven Prediction of Sintering Burn-Through Point Based on Novel Genetic Programming

Combining Neural Network and Genetic Algorithms to Optimize Low Nox Pulverized Coal Combustion

Coal Blending Control Based on Mixed Optimization of Genetic Algorithm and Neural Network

Modeling, Prediction And Multi-Objective Optimization Of The Coal Gasification System