Abstract:We present a design of a laterally tapered optical waveguide mode-size converter from super luminescent diode (SLD) to silica-based planar lightwave circuit (PLC). The mode-size converter is based on silica-based PLC. By using three dimensional semi-vectorial beam propagation methods, laterally tapered waveguides with different boundaries are simulated and compared with each other, where the factors of polarization-dependent loss and coupling loss are mainly focused on. The results show that the most influential factor for polarization-dependent loss is the ratio of the divergence angle of SLD in the horizontal direction and the vertical direction. The refractive index difference. between core layer and cladding layer, core width of endface and taper length influence coupling loss mostly, while the effect of all side boundaries is within 0.05 dB. We also investigate the SLD misalignment tolerance and wavelength bandwidth's impact on coupling loss. Furthermore, we examine the performance of the mode-size converter based on a particular SLD which has a divergence angle of 30 degrees x45 degrees. By optimizing the parameters of the tapered waveguide, the coupling efficiency is increased to 62.4% and the polarization-dependent loss is reduced to 0.035 dB. Meanwhile, it enables us to reduce the coupling loss variation to 0.05dB with core width of endface fabrication tolerance of +/- 0.5 mu m and taper length tolerance of +/- 0.5 mm. The proposed mode-size converter has been demonstrated to be well performed, implying its application in the optical transceiver module using SLD as light source and hybrid integration of III-V semiconductor waveguiding devices and PLCs.

High Efficient Coupling Between Wedged-Slaped Fiber And Planar Lightwave Circuit Chip Using Gradient Refractive-Index Media

Polarization Insensitive and Low-Loss Coupling Mode-Size Converter from Super Luminescent Diode to Silica-Based Planar Lightwave Circuit

Alignment and Coupling between Planar Lightwave Circuit Chip and Wedge-Shaped Fiber

Quasi-Axial GRIN Lens Implemented in Wedge-Shaped Fiber Coupling with InP-Based PLC

Interlayer Slope Waveguide Coupler for Multilayer Chalcogenide Photonics

High-efficiency Grating Coupler Based on Fast Directional Optimization and Robust Layout Strategy in 130 Nm CMOS Process.

High-efficiency Wideband SiNx-on-SOI Grating Coupler with Low Fabrication Complexity.

Experimental Demonstration of an Apodized-Imaging Chip-Fiber Grating Coupler for Si_3N_4 Waveguides

High-efficiency Apodized-Imaging Chip-Fiber Grating Coupler for Silicon Nitride Waveguides

Highly Integrated Planar Lightwave Circuits Based on Plasmonic and Si Nano-Waveguides

High Efficiency Grating Coupler for Coupling Between Single-Mode Fiber and SOI Waveguides

Compact and efficient coupler to interface hybrid dielectric-loaded plasmonic waveguide with silicon photonic slab waveguide

Broadband Coupler Between Silicon Waveguide and Hybrid Plasmonic Waveguide

High Transmitting and Coupling Characteristics of Light at the Surface of A Photonic Crystal with A Triangular Lattice of Air Holes

A Semi-Cylindrical Axial Gradient Refractive-Index Lens in Wedge-Shaped Fiber Coupling with InP-Based PLC

Experimental Observation on the Coupling Characteristics of Tapered and Lensed Fiber and Planar Lightwave Circuit Chip

High-Performance and Compact Binary Blazed Grating Coupler Based on an Asymmetric Subgrating Structure and Vertical Coupling

Efficient Fiber‐to‐Chip Interface via an Intermediated CdS Nanowire

Compact Silicon-Based On-Chip Wavelength Triplexer Using Directional Couplers with Double Bridged Subwavelength Gratings.

Efficient coupling between single mode fibers and glass chip waveguides via graded refractive index fiber tips

Latest advances in the coupling between SOI-based waveguides and fibers