Abstract:The slab laser is a promising architecture to achieve high beam quality and high power. By propagating the laser beams in zigzag geometries, the temperature gradient in the gain medium can be well averaged, and the beam quality in this direction can be excellent. However, the temperature gradient in the non-zigzag direction is not compensated, resulting in aberrations in this direction which lead to poorer beam quality. Among the overall aberrations, the main contributors are two low-order aberrations: astigmatism and defocus. These aberrations will magnify beam divergence angle and degrade beam quality. If the beam divergence angles in both directions are almost zero, the astigmatism and defocus are well corrected. Besides, the output beams of slab lasers are generally in a rectangular aperture with high aspect ratio (normally 1: 10), which need to be reshaped into square in many applications. In this paper, a new method is proposed to correct low-order aberrations and reshape the beams of slab lasers. Three lenses are adapted, one is a spherical lens and the others are cylindrical lenses. These lenses work as a beam shaping system, which converts the beam from rectangular into square and the low-order aberrations are compensated simultaneously. Two wavefront sensors are used to detect input and output beam parameters. The initial size of the beam is 4mmx20mm, and peak to valley (PV) value of the wavefront is several tens of microns. Simulation results show that after correction, the dimension becomes 40mmx40mm, and peak to valley (PV) value of the wavefront is less than 1microns.

A Micro-Adaptive Optics System for Aberrated Laser Beams Compensation

Research of an Adaptive Micro-Mirror Based on Micro-Opto-Electro-Mechanical- System

Beam Wavefront Dynamical Compensation by Aberrations of the Gain Medium in Laser Amplifiers for Beam Quality Improvement.

Method to Improve Beam Quality by Compensating Spherical Aberrations in Master Oscillator Power Amplifier Laser Systems

MEMS-based adaptive optics scanning laser ophthalmoscopy

Analysis Of Nonlinear Self-Focusing Phenomenon In High-Power Laser System Based On Ray-Tracing

Automatic Low-Order Aberration Compensator for Solid-State Slab Lasers

Experimental Investigation on the Beam Quality Improvement of the Fiber Laser by Adaptive Optics

Double Drive Modes Unimorph Deformable Mirror For Femtosecond Laser Beam Wavefront Correction

Automatic Low-Order Aberration Correction Based on Geometry Optics: Simulations

Adaptive Slab Laser Beam Quality Improvement Using A Weighted Least-Squares Reconstruction Algorithm

A Novel Variable Optical Attenuator Based on Micro-Electromechanical System (MEMS)

Recent progress of adaptive beam cleanup of solid-state slab lasers in Institute of Optics and Electronics, Chinese Academy of Sciences

Laser-controlled adaptive optic for beam quality enhancement in a multipass thin disk amplifier

Adaptive aberration correction of a 5 J/6.6 ns/200 Hz solid-state Nd:YAG laser.

Simulative and Experimental Characterization of an Adaptive Astigmatic Membrane Mirror

Simulation and analysis of the thermal aberration dynamic compensation based on the cascaded multi-crystal system (CMCS)

Numerical Analysis of a Novel Two-Stage Enlargement and Adaptive Correction Approach for the Annular Aberration Compensation

Wavefront Shaping by A Small-Aperture Deformable Mirror in the Front Stage for High-Power Laser Systems

Analysis of the Effects on Ultra-Short Laser Pulse Beam Quality Caused by Errors in Optical Systems

Performance analysis of adaptive fiber laser array propagating in atmosphere with correction of high order aberrations in sub-aperture