Abstract:With the rapid development of aerospace technologies, coupling of pressure oscillations and unstable combustion in solid rocket motors has become a research hotspot in the past few years. In the present study, an experimental system is designed to investigate high-pressure flows subjected to acoustic excitation. Then cold flow experiments and numerical simulations are carried out with different acoustic excitation frequencies, different background pressures, and different ambient temperatures. The pressure oscillation characteristics and the acoustic response characteristics of the combustion chamber in a high-temperature and high-pressure combustion chamber are analyzed. It is found that the frequency of the pressure oscillation inside the combustion chamber and the output excitation frequency of the signal generator are the same. When the excitation frequency is in the range of 50-200 Hz, the sound pressure amplitude corresponding to each test temperature increases with the increase of the frequency. Moreover, when the background pressure is in the range of 0-0.6 MPa, the sound pressure amplitude increases with the increase of the pressure. Meanwhile, there is no clear correlation between the sound pressure amplitude of the combustion chamber and temperature when the chamber temperature is in the range of 293-363 K. The obtained results from the numerical simulation are consistent with the experimental data and the relative error is less than 5.9 %, which verifies the accuracy of the model. The simulated sound pressure amplitude in the combustion chamber at high temperatures and high pressures is a cubic function of pressure and temperature. The present study is expected to provide an innovative way to investigate pressure oscillations and combustion instability of the propellant in the combustion chamber of solid rocket motors at high temperatures and high pressures.

Experimental Validation of Flow Field in the Secondary Combustor of a Subscale Ducted Rocket

Numerical Investigation of the Combustion and Thermoacoustic Characteristics in an Annular Combustor with Hydrogen

Experimental and Numerical Investigation of the Non-Reacting Flow in a High-Fidelity Heavy-Duty Gas Turbine DLN Combustor

Numerical Simulation Coupling on Fluid Flow and Heat Transfer in Nozzle and Equipment Cabin of Solid Rocket Motor during Operation Process

Preliminary experimental study on combustion characteristics in a solid rocket motor nozzle based on the TDLAS system

Numerical Simulation of Effects of Venturi Tube Throat Diameter on Flow Field of Combustor

A Numerical Study of Supercritical Forced Convective Heat Transfer of N-Heptane Inside A Horizontal Miniature Tube

Influence of the turbulence model on the numerical predictions of cold turbulent flow in a heavy-duty gas turbine DLN combustor

Experimental study on the rocket-ejector system with a throat in the secondary stream

Numerical Simulation of Inner Flow Field of a Pintle Injector Variable Thrust Rocket Engine

The Confirmation of Thermal Boundary Parameters in an Oxygen Kerosene Fuel-Rich Rocket Engine

LES of Turbulent Reacting Flow in a Rocket Based Combined Cycle Combustor

Study on heat transfer model of solid rocket motor combustor under high-temperature two-phase flow scour state

Experimental research on the thermal throat of rocket based combined cycle combustor

Investigating the acoustic response characteristics of a solid rocket motor combustor in high‐temperature and high‐pressure environments

Numerical Simulations and Optimization of a Micro Annular Combustor

Experimental studies on swirling and recirculating two-phase flow field in a cold model of dual-inlet sudden-expansion combustor

EXPERAMENTAL STUDY ON FLOW FIELD BEHAVIOR CONCERNING THE CROSSED JET FLOWS OF MICRO-SWIRLING PRIMARY AIR AS WELL AS UPPER AND LOWER SECONDARY AIR

Numerical Investigation of Work Cycle Characteristics in the Combustion Chamber of a Lox/Methane Liquid-Propellant Rocket Engine Featuring Reductant Power Gas Combustion

Based on Fluent Numerical Calculation of Refractive Index on Rocket Engine Nozzle Plume

Simulation and Application of a New Multiphase Flow Ablation Test System for Thermal Protection Materials Based on Liquid Rocket Engine