Abstract:During the recovery process after the short fault at the grid side, the doubly-fed induction generator (DFIG) may suffer from overvoltage of the dc-link and over-modulation of the grid-side converter (GSC). Increasing the dc voltage reference improves the modulation of the GSC, but increases the dc overvoltage. A larger dc capacitor suppresses the dc voltage, but deteriorates the dc modulation. The PI parameters of the DFIG may also be adjusted to suppress the dc overvoltage and improve the modulation. Coordinating the dc voltage reference, the dc capacitance, and/or the PI parameters may improve the high-voltage ride-through (HVRT) capability of the DFIG, which has not been studied yet. In this paper, the analytical expression of the trajectory sensitivities of the dc voltage with respect to above parameters is newly proposed, based on which an index of the dc voltage is newly defined to select the critical parameters. Change of dc voltage reference after the grid voltage recovery is included to damp the 2nd dc overvoltage, which adds the difficulty of solving the trajectory sensitivity. The objective function combining the areas about the dc overvoltage and over-modulation is newly proposed to optimize these parameters for the HVRT of the DFIG. The proposed model is solved with the interior point method. Numerical simulation validates the accuracy of the trajectory sensitivity. The proposed index selects the critical PI parameters which reduces the optimization time, and keeping desirable control effect. Coordination of dc capacitance and dc voltage reference is effective to suppress the dc overvoltage and improve dc modulation. Further including the PI parameters helps to damp the oscillation and reduce the recovery time of the dc voltage.

An Approach To Select Pi Parameters Of Hvdc Controllers

Study on Parameter Optimization of HVDC PI Controllers

A P-Q Coordination Based Model Predictive Control for DFIG High-Voltage Ride Through

Research on Voltage Stability of HVDC Receiving-end System Based on Power Limit Trajectory

A Pid-Controlled Hvc with High Dynamic Stability for Underwater Observation Network

Impedance Characteristic Analysis and Phase-locked Angle Feedforward-based Stability Improvement for LCC-HVDC in Sending AC Grid

Design of Dc-Bus Voltage Controller for Hybrid Active Power Filter Based on Pole-Zero Placement

Design Method of Control Parameters for PCS Grid-Connected Mode Based on the Stability Analysis of Islanding Switching

A Genetic Approach to Design a HVDC Supplementary Subsynchronous Damping Controller

Performance assessment of VSC-based HVDC system in asynchronous grid interconnection: Offline and real-time validation of control design with symmetric optimum PI tuning

Parameter Optimization for HVDC Control System Based on PSCAD-MATLAB Combined Invocation

Design and Experiment of Heuristic Adaptive HVDC Supplementary Damping Controller Based on Online Prony Analysis

Model Predictive Control for VSC-HVDC Supplying Passive Networks

Parameter tuning and evaluation for optimal PI controllers

A Polytopic System Theory Approach to Wide-Area Decentralized Coordinated Control of Hvdc System

TSA based optimization to dc voltage and dc modulation for high-voltage ride-through (HVRT) of DFIG: School of Electrical Engineering and Automation, Hefei University of Technology, Hefei 230009, China

LCC-HVDC Frequency Robust Control Strategy Based on System Parameter Identification in Islanded Operation Mode

Approximate Dynamic Programming Coordinated Control In Multi-Infeed Hvdc Power System

Optimal Coordinate Design of Multiple Hvdc Modulation Controllers Based on Mimo System Identification

Research and Experiment of Wide-area Stability Control Techniques in Electric Power Systems

Selective Pole Placement and Cancellation for Proportional Resonant Control Design Used in Voltage Source Inverter