Abstract:Transportation Research Record, Ahead of Print. For high-precision continuous thickness measurement of thin-layer asphalt loose paving, the paper proposes a compact ground penetrating radar (GPR) solution with smaller volume than the conventional air-coupled antenna. It takes into account the minimum identifiable thickness of the GPR tailing characteristics of radar signals, the common thickness range of thin-layer asphalt, and the vibration of construction machinery. In general, the overlap between bottom reflection and surface reflection of thin-layer asphalt can be solved by subtracting the reflection of the asphalt surface from the calibration waveform file of a metal plate. However, because the operating environment of asphalt paving is not suitable to realize the frequent static calibration of metal plates, the paper designs a bow-tie antenna loaded with high loss absorbent material substrate, which significantly improves the signal tailing phenomenon and greatly reduces the size of the air-coupled antenna. At the same time, in view of dynamic change of paver vibration and the requirements of the construction site, less calibration is more advantageous. Based on the full-amplitude reflection method, a fitting formula for the dielectric constant of asphalt suitable for mechanical vibration is proposed in this paper, to further improve the engineering applicability of the detection system. Finally, static calibration asphalt thickness, dynamic measured dielectric constant asphalt thickness, and manual sampling thickness under three construction conditions are compared, and the capability of the compact air-coupled GPR detection system proposed in this paper is comprehensively verified.

A high-accuracy calibration method for thickness measurements of asphalt pavement using ground-penetrating radar

Research and Application of Compact Air-Coupled Ground Penetrating Radar in Thin-Layer Asphalt Thickness Testing and Vibration Resistant Calibration Method

Measuring soil layer thickness in land rearrangement with GPR data

Real-time Assessment of Asphalt Pavement Internal Conditions Based on Automatic Signal Processing Using Ground-Penetrating Radar

The Calibration Processing for Impulse Ground Penetrating Radar

Real-Time Asphalt Pavement Layer Thickness Prediction Using Ground-Penetrating Radar Based on a Modified Extended Common Mid-Point (XCMP) Approach

Automatic detection of asphalt pavement thickness: A method combining GPR images and improved Canny algorithm

Rapid Detection Methods for Asphalt Pavement Thicknesses and Defects by a Vehicle-Mounted Ground Penetrating Radar (GPR) System

Measurement of asphalt pavement layer thickness of road using ground penetrating radar

Non-destructive survey of pavement layer thicknesses with ground penetrating radar

Research and Application of Backcalculation for Pavement Permittivity by Genetic Algorithm

Research on Dielectric Properties of Asphalt Concrete with GPR

Assessment of Pavement Structural Conditions and Remaining Life Combining Accelerated Pavement Testing and Ground-Penetrating Radar

Comparative evaluation of nondestructive devices for measuring pavement thickness in the field

The Investigating on the Thickness of the Asphalt Pavement Detecting with the Technology of the Air-coupled Radar

Improving FMCW GPR Precision Through the CZT Algorithm for Pavement Thickness Measurements

Three-Dimensional Orthorectified Simulation and Ground Penetrating Radar Detection of Interlayer Bonding Condition in Asphalt Pavements

Automatic pavement layer identification with multichannel ground penetrating radar at traffic speed

Evaluation of pavement layer thicknesses using GPR: A comparison between full-wave inversion and the straight-ray method

A Hybrid Method Applied to Improve the Efficiency of Full-Waveform Inversion for Pavement Characterization.