Abstract:Vibration‐based structural identification is an essential technique for assessing structural conditions by inferring information from the dynamic characteristics of structures. However, the robustness of such techniques in monitoring the progressive damage of real structures has been validated with only a handful of research efforts, largely due to the paucity of monitoring data recorded from damaged structures. In a recent experimental program, a mid‐rise cold‐formed steel building was constructed at full scale atop a large shake table and subsequently subjected to a unique multi‐hazard scenario including earthquake, post‐earthquake fire, and finally post‐fire earthquake loading. Complementing the simulated hazard events, low‐amplitude vibration tests, including ambient vibrations and white noise base excitation tests, were conducted throughout the construction and the test phases. Using the vibration data collected during the multi‐hazard test program, this paper focuses on understanding the modal characteristics of the cold‐formed steel building in correlation with the construction and the structural damage progressively induced by the simulated hazard events. The modal parameters of the building (i.e., natural frequencies, damping ratios, and mode shapes) are estimated using two input–output and two output‐only time‐domain system identification techniques. Agreement between the evolution of modal parameters and the observations of the progression of physical damage demonstrates the effectiveness of the vibration‐based system identification techniques for structural condition monitoring and damage assessment.

Structural damage identification under strong earthquake excitation

Structural Damage Presence Detection from Time-Varying Modal Parameters in Earthquake

Structural Time-Invariant Modal Parameters Identification from Seismic Response Data

Structural Time-Varying Parameter Analysis Based on Adaptive System Identification Method Using Strong Motion Records

Structure Damage Identification Based on Regularized ARMA Time Series Model under Environmental Excitation

Structural Dynamic Characteristics Determination Using Response Data in Small Earthquakes

Structural Damage Identification using Modal Data. I: Simulation Verification

Application of ARX and RARX Methods in Structural Parameter Identification

Experimental Study of Structural Damage Identification Based on Modal Parameters and Decay Ratio of Acceleration Signals

Damage Identification for Underground Structure Based on Frequency Response Function.

Parameter identification of a 9-story building for earthquake damage detection

Structural Damage Identification using Modal Data. II: Test Verification

Structural Damage Detection of a Shear Building under Unknown Earthquake Excitation with Limited Observations of Absolute Acceleration Reponses

Evolution of modal characteristics of a mid‐rise cold‐formed steel building during construction and earthquake testing

Damage Identification Method Based On Correlation Function Of Structural Responses To Operational Excitation

Damage Diagnosis of Structures Based on Vibration Mode

Structural damage identification based on sensitivity analysis of autoregressive coefficients of time series models

Vibration-Based Damage Detection with Structural Modal Characteristics

Damage diagnosis to a two-story steel braced-frame model structure

Structural Damage Identification Based on Transmissibility in Time Domain

Structural damage identification using static test data and changes in frequencies