On FEM/BEM for the Problems of Vibration and Acoustic Radiation from an Axially Stiffened Cylindrical Shell with Two End Plates

Huanwen Shi,Meiping Sheng,Jingcai Sun,Chen He

DOI: https://doi.org/10.13465/j.cnki.jvs.2006.02.024

2006-01-01

Abstract:A Three dimensional model of finite element method/boundary element method for computing the sound field radiated from an axially stiffened cylindrical shell with two end plates in water has been established, and the effects of the height, the width and the number of axial stiffeners on the mean surface velocity, the radiated sound power, the radiation efficiency and pressure directivity of sound field have been investigated. The meshing data and modal data of the model in vacuo obtained from finite element method (FEM) code ANSYS are put into boundary element method (BEM) code SYSNOISE and used for computing the parameters of the coupled sound field. The results show that: (1) The increases in the height, the width or the number of stiffeners make the frequency curve peaks of the mean surface velocity, the radiated sound power and the radiation efficiency shift away from that of the cylindrical shell without stiffener, and makes the radiation efficiency increase. However it doesn't change the mean surface velocity and the radiated sound power apparently. (2) The increase in the height or the width of the stiffeners causes the contribution of low frequency acoustic radiation from two end plates to increase, and causes high frequency acoustic radiation to increase in the direction opposite to the driving force. The directivity pattern of the sound field can be changed by adjusting the number of axial stiffeners when the axially driving force is exerted on one of the stiffeners. All above is of significance to the prediction and control of noise radiated from underwater structure.