Abstract:Time synchronization is very important in a distributed chained seismic acquisition system with a large number of data acquisition nodes (DANs). The time synchronization error has two causes. On the one hand, there is a large accumulated propagation delay when commands propagate from the analysis and control system to multiple distant DANs, which makes it impossible for different DANs to receive the same command synchronously. Unfortunately, the propagation delay of commands (PDCs) varies in different application environments. On the other hand, the phase jitter of both the master clock and the clock recovery phase-locked loop, which is designed to extract the timing signal, may also cause the time synchronization error. In this paper, in order to achieve accurate time synchronization, a novel calibration method is proposed which can align the PDCs of all of the DANs in real time and overcome the time synchronization error caused by the phase jitter. Firstly, we give a quantitative analysis of the time synchronization error caused by both the PDCs and the phase jitter. Secondly, we propose a back and forth model (BFM) and a transmission delay measurement method (TDMM) to overcome these difficulties. Furthermore, the BFM is designed as the hardware configuration to measure the PDCs and calibrate the time synchronization error. The TDMM is used to measure the PDCs accurately. Thirdly, in order to overcome the time synchronization error caused by the phase jitter, a compression and mapping algorithm (CMA) is presented. Finally, based on the proposed BFM, TDMM and CMA, a united calibration algorithm is developed to overcome the time synchronization error caused by both the PDCs and the phase jitter. The simulation experiment results show the effectiveness of the calibration method proposed in this paper.

Delay Time Compensation Scheme for Surface Acoustic Wave's Wavelet Reconstruction Device Based on Multistrip Coupler

Delay time compensation for surface acoustic wave's wavelet transform array device

Dual Track Architecture and Time Synchronous Scheme for Wavelet Reconstruction Processor Using Saw Device Based on Msc

A novel synchronized methods of underwater acoustic signal scheme based on DSPs

Dual Track Surface Acoustic Wave'S Wavelet Transform Device Based On Multistrip Coupler

Reference Phase Stabilizer for Distributed Underwater Sonar Systems.

Orthogonal Frequency-Division Multiplexing Underwater Acoustic Communications with Time Reversal Processing

Time-varying Doppler Compensation for Orthogonal Frequency Division Multiplexing-Based Underwater Acoustic Communications

Doubly-Spread Channel Equalization Based on Channel Shortening in Underwater Distributed Acoustic Sensing Communications

An Underwater Time Reversal Communication Method Using Symbol-Based Doppler Compensation with a Single Sound Pressure Sensor

High-spectral-efficiency underwater acoustic communication with integrated phase tracking and timing resampling in fast time-varying scenarios

Self-Contained High-SNR Underwater Acoustic Signal Acquisition Node and Synchronization Sampling Method for Multiple Distributed Nodes

Improved Multi-Hop Time Synchronization for Underwater Acoustic Networks

Implementing Single-Scale Wavelet Transform Processor with Magnetostatic Surface Wave Device

A FEM Simulation Approach for Multilayered SAW Delay Line Devices

Calibration Method of the Time Synchronization Error of Many Data Acquisition Nodes in the Chained System

Joint Doppler Scale Estimation and Timing Synchronization in Underwater Acoustic Communications

A Robust Time-Frequency Synchronization Method for Underwater Acoustic OFDM Communication Systems

Joint Synchronization and Doppler Scale Estimation Using Zadoff-Chu Sequences for Underwater Acoustic Communications

Time-delay Compensation in Detection Electronics of Fast Scanning 2D SAW/BAW Laser Probe

Multireceiver Synthetic Aperture Sonar Chirp Scaling Algorithm Considering Intrapulse Doppler Shift