Abstract:Post-earthquake survey of several strong earthquakes demonstrated that pounding between the neighboring civil infrastructures, such as building and highway bridge, would induce significant structural damage, even collapse, of the structures. This article presents a pounding experiment of highway bridge, especially focused on the point-to-surface pounding of bridge decks due to torsional rotation, when subjected to extreme bi-directional earthquake excitations. To experimentally investigate the point-to-surface pounding between the neighboring bridge segments, a base-isolated highway bridge model, in which the mass centers of the bridge decks do not strictly coincide with the corresponding stiffness centers, is manufactured. A series of shaking table tests of the highway bridge model are carried out for the structural model with large and small separations of the expansion joint to investigate the dynamic responses of the bridge model with and without including the pounding effects, respectively. An analytical model of the highway bridge, in which the point-to-surface pounding is represented by using a modified contact-friction element, is also established based on the lump mass model with three degrees of freedom for each segment. Based on the test results, the model parameters of the modified contact-friction element are identified, and the analytical responses of the highway bridge model with pounding effects are compared with the experimental data. The results show that the highway bridge is vulnerable to the deck rotation, and point-to-surface pounding should be considered in the structural design to lighten the pounding damage of the highway bridge under strong earthquake excitations.

Pounding analysis methods and control of highway bridges under seismic excitations

A Method for Controlling Seismic Damage of RC Bridge Piers Subjected to Strong Aftershocks

Stochastic seismic responses analysis of long-span rigid-framed bridge with high piers considering travelling wave effect

Application of the Endurance Time Method to the Seismic Analysis and Evaluation of Highway Bridges Considering Pounding Effects

Dynamic and Mitigation Analysis of Seismic Pounding Effect on Multi-Span Highway Bridges Subjected to Spatial Earthquakes

Point-To-Surface Pounding of Highway Bridges with Deck Rotation Subjected to Bi-Directional Earthquake Excitations

Pounding analysis of elevated bridges subjected to earthquake excitations by using explicit finite element method

Semi-Active Control Of Highway Bridges With Pounding Effect By Using Magnetorheological Dampers Under Earthquake Excitations - Art. No. 642310

Pounding Reduction of Highway Bridges with Pounding Effect by Using Magnetorheological Dampers Under Earthquake Excitations

Study on Semi-Active Control of Highway Bridge Pounding under Seismic Excitations

Experimental and Analytical Study on Pounding Reduction of Base‐isolated Highway Bridges Using MR Dampers

Earthquake response of bridges bearing on flexible rubber considering pounding of girders

Probabilistic Pounding Analysis of High-Pier Continuous Rigid Frame Bridge with Actual Site Conditions

Pounding-Induced Stress Wave Analysis and Mitigation of Highway Bridges Under Earthquakes

An Analysis of Pounding Mitigation and Stress Waves in Highway Bridges with Shape Memory Alloy Pseudo-Rubber Shock-Absorbing Devices

Highway bridge unseating and reduction analysis using SMA restrainers under earthquake excitations

Seismic Study of an Isolated Cable-Stayed Bridge under Near-Fault Ground Motions

Research of pounding effect on seismic response of large span continuous rigid-frame bridge under heavy haul railway

Investigation Of The Parameters Of Hertz Impact Model For The Pounding Analysis Of Highway Bridge

A Phenomenological Contact-Element Model Considering Slight Non-Uniform Contact for Pounding Analysis of Highway Bridges under Seismic Excitations

Effects of the Transverse Deck-Roadbed Pounding on the Seismic Behaviors of the Prefabricated Frame Bridge