Abstract:In this study, porous lead zirconate titanate (PZT) ceramics with porosity ranging from 46.4% to 82.3% were produced by the gel casting technology of particle-stabilized ceramic foams with the solid loading of 5-25 vol%, then the Portland cement paste was cast in porous PZT ceramics with continuous vibration to fabricate 3-3 type cement-based piezoelectric composites. The microstructure, dielectric, piezoelectric, and electromechanical coupling properties of the composites were characterized. With the increase in initial solid loading of PZT slurry, both the porosity, open porosity and pore size of porous PZT ceramics decreased correspondingly, which have prevented the filling of cement paste into the porous ceramics and led to the increment of PZT content in the composites. Increase in the PZT content contributed to the relative permittivity (epsilon(r)) and longitudinal piezoelectric strain coefficient (d(33)), and a resultant reduction in piezoelectric voltage coefficient (g(33)). The prepared composites possessed a maximal thickness electromechanical coupling coefficient (K-t) value of 41.22%, higher than that of planar electromechanical coupling coefficient (K-p), indicating enhanced thickness mode oscillations of the composite. With the increase in PZT volume fraction, the PZT-cement composites turned from typical 3-3 structure to appoximate sandwich structure gradually, leading to more energy loss during electromechanical process and obvious decrease of the mechanical quality factor (Q(m)). The acoustic impedance (Z) of specimens ranged from 6.69 to 8.27 MRayls, close to that of cement materials (similar to 10 MRayls), making them promising candidate for application in civil engineering.

Effect of electric conduction phase on acoustic absorption property of the piezoelectric composite

Effects of Carbon Black Content on Microwave Absorbing and Mechanical Properties of Linear Low Density Polyethylene/Ethylene-Octene Copolymer/Calcium Carbonate Composites

Study on Acoustic Property of 0-3 Piezoelectric Composites

Preparation and Properties of Damping Materials in Multi-Phase System

Theoretical Research On Active Sound Absorption Of 1-3 Piezoelectric Composites Based On Equal Strain Model

Study on Piezoelectric and Acoustic Properties of Piezoelectric Ceramics/nbr Composite

Damping Behavior and Acoustic Performance of Polyurethane/Lead Zirconate Titanate Ceramic Composites

Theoretical analysis on hybrid local piezoelectric and conductive effect on sound absorption performance of porous poly(vinylidene fluoride)

Damping Characteristics of Chlorobutyl Rubber/Poly(Ethyl Acrylate)/Piezoelectric Ceramic/Carbon Black Composites

Effect of Filling Material Properties on 1–3 Piezoelectric Composite Performance

Effective Properties Analysis of a Piezoelectric Composite Including Conducting Phase Using a Numerical Homogenization Approach

Effects of Porosity on Dielectric and Piezoelectric Properties of Porous Lead Zirconate Titanate Ceramics

On the product property of 0-3 piezoelectric ceramic-polymer composites

Piezoelectric Properties of PVDF Modified 3-3 Type Cement-Based Piezoelectric Composites

Research progress of piezoelectric polymer PVDF in sound absorption technology

Fabrication and properties of 3-3 type PZT-ordinary Portland cement composites

Damping properties of epoxy-embedded piezoelectric composites

The electromechanical coupling property and vibration behavior in 1-3 type piezoelectric composites

Piezoelectric and Dielectric Behavior of 0-3 Asphalt-Based Composites with Carbon Black

Effect of preparation conditions on dielectric and piezoelectric properties of piezoelectric ceramics/acrylonitrile-butadiene rubber composites

Electrical and Mechanical Properties of Piezoelectric Ceramic/Metal Composites in the Pb(Zr,Ti)O-3/Pt System