Abstract:A significant fraction of the total power in highly synchronous systems is dissipated over clock networks. Hence, low-power clocking schemes are promising approaches for low-power design. We propose four novel energy recovery clocked flip-flops that enable energy recovery from the clock network, resulting in significant energy savings. The proposed flip-flops operate with a single-phase sinusoidal clock, which can be generated with high efficiency. In the TSMC 0.25-$\mu$m CMOS technology, we implemented 1024 proposed energy recovery clocked flip-flops through an H-tree clock network driven by a resonant clock-generator to generate a sinusoidal clock. Simulation results show a power reduction of 90% on the clock-tree and total power savings of up to 83% as compared to the same implementation using the conventional square-wave clocking scheme and flip-flops. Using a sinusoidal clock signal for energy recovery prevents application of existing clock gating solutions. In this paper, we also propose clock gating solutions for energy recovery clocking. Applying our clock gating to the energy recovery clocked flip-flops reduces their power by more than 1000× in the idle mode with negligible power and delay overhead in the active mode. Finally, a test chip containing two pipelined multipliers one designed with conventional square wave clocked flip-flops and the other one with the proposed energy recovery clocked flip-flops is fabricated and measured. Based on measurement results, the energy recovery clocking scheme and flip-flops show a power reduction of 71% on the clock-tree and 39% on flip-flops, resulting in an overall power savings of 25% for the multiplier chip.

Partition-Based Retiming and Precomputation for Dynamic Power Reduction

Run-time Demand Estimation and Modulation of On-Chip Decaps at System Level for Leakage Power Reduction in Multicore Chips

Combining Power and Arithmetic Optimization via Datapath Rewriting

An Application-Specific Memory Partitioning Method for Low Power

Partitioning The Program Into Different Regions Using Dynamic And Static Approach With Kernel-Assisted In Power Management For Embedded System

A New Method to Reduce Power Dissipation Based on Dynamic Reconfigurable Technology

Network Flow-Based Simultaneous Retiming and Slack Budgeting for Low Power Design

Power-Aware Code Restructuring for Embedded Parallel Storing Device

Power Optimization Techniques in CMOS IC Design

Global approach for CMOS circuit optimization by transistor resizing

Pattern-directed Circuit Virtual Partitioning for Test Power Reduction

IR-drop reduction through combinational circuit partitioning

Partitioning-based Approach to Fast On-Chip Decap Budgeting and Minimization

A Power Optimization Approach for Large-scale RM-TB Dual Logic Circuits Based on an Adaptive Multi-Task Intelligent Algorithm

Ultra Low-Power Clocking Scheme Using Energy Recovery and Clock Gating

A low power architecture based on unidirectional cut

Multi-Optimization Power Management for Chip Multiprocessors

Minimization of Circuit Delay and Power through Gate Sizing and Threshold Voltage Assignment

Power Analysis and Optimization Methods of the Pipelined Array Multiplier

Design of Low-Power High-Speed Divide-by-2/3 Prescalers with Improved True Single-Phase Clock Scheme

A low-power high-speed 32/33 prescaler based on novel divide-by-4/5 unit with improved true single-phase clock logic