Abstract:We conduct a computational fluid dynamics simulation to investigate the behaviors of bubble breakup in a microfluidic T-junction using volume-of-fluid method to represent the interface. The evolution of bubble morphology and the distributions of velocity and pressure in flow field are analyzed, and the effect of width ratio between main channel and branch on the bubble morphology are evaluated. The results indicate that, the “tunnel” breakup, obstructed breakup, combined breakup and non-breakup are observed during the bubble flows through the T-junctions under different condition. The whole bubble breakup process undergoes the extension, squeeze and pinch-off stages, while the non-breakup process experiences extension and pushing stages. We find that, in the squeeze stage, a local vortex flow forms at the front edge of the bubble for the “tunnel” breakup while the velocity inside the bubble is of a parabolic distribution for the obstructed breakup. Irrespective of non-breakup regimes, there is a sudden pressure drop occurring at the gas–liquid interface of the bubble in the squeeze stage, and the pressure drop at the front interface is far larger than that at the depression region. The transition of the bubble breakup regime through the T-junction occurs with an increase in width ratio of main channel to the branch, which sequentially experiences the non-breakup regime, “tunnel” breakup regime and obstructed breakup regime. The flow regime diagrams are plotted with a power-law correlation to distinguish the bubble/droplet breakup and non-breakup regimes, which also characterize the difference between bubble and droplet breakup through a T-junction.

Experimental visualization of bubble generation and breakup in T-junctions of microchannels

Bubble breakup in a swirl-venturi microbubble generator

Bubble Formation in a Swirl-Venturi Microbubble Generator

Experimental Measurement of Bubble Breakup in a Jet Bubbling Reactor

Generation of Bubbles in T-junction Micro-channels

Bubble Breakup in a Microfluidic T-junction

The bubble breakup process and behavior in T-type microchannels

Dynamics of Bubble Formation in Highly Viscous Liquid in Co-Flowing Microfluidic Device

Formation Mechanism and Size Prediction of Bubble in Opposite-Flowing T-shaped Microchannel

Experimental Study of Microbubble Coalescence in a T-junction Microfluidic Device

Asymmetrical Breakup of Bubbles at a Microfluidic T-junction Divergence: Feedback Effect of Bubble Collision

FORMATION OF NANOLITER BUBBLES IN MICROFLUIDIC T-JUNCTIONS

Taylor Bubble Generation Rules in Liquids with a Higher Viscosity in a T-Junction Microchannel

Geometric Effect on Gas–Liquid Bubbly Flow in Capillary-Embedded T-Junction Microchannels

Breakup Characteristics of Bubble Moving in T-Junction Micro-Channel

Controllable Gas-Liquid Phase Flow Patterns And Monodisperse Microbubbles In A Microfluidic T-Junction Device

Hydrodynamic feedback on bubble breakup at a T‐junction within an asymmetric loop

Magic Microfluidic T-Junctions: Valving and Bubbling

Experimental Investigation of Bubble Formation in a Microfluidic T-Shaped Junction

Bubble Formation in T-junctions Within Parallelized Microchannels: Effect of Viscoelasticity

Squeezing-to-dripping Transition for Bubble Formation in a Microfluidic T-junction