Abstract:On the basis of its structures, surface properties and adhesion with iron, cobalt was selected as the matrix in a composite coating to support a load. PTFE was inserted into the matrix to assist lubrication. A composite coating of Co-P-PTFE was prepared by electroless plating. The composite consists of 9.0 percent PTFE, 5.1 percent P and 85.9 percent Co by weight. The properties and structures of Co-P-PTFE composite were studied by X-ray, SEM and ESCA, etc. The results show that the composite had high hardness and good adhesion to the matrix after plating. X-ray analysis showed that the composite was a hexagonal system and its crystal showed no change except that the lattice constant increased, evidently after it was treated with heat. The cobalt (100) face of the hexagonal system parallels the matrix surface and a solid solution was formed in the composite treated with heat. The composite has a strong tendency toward a certain direction. AES analysis indicated that the proportion of Co, P and F content is 13.9:3.1:83 on the surface of the composite. ESCA analysis proved further that fluorine exists in a form of PTFE on the surface of the composite, and phosphorus and cobalt exist in forms of simple phosphorus and Co +3, respectively. Tribology tests showed that the Co-P-PTFE composite has good tribological properties. The composite wear is 45 percent lower by weight loss than the coating of Co-P and 79 percent lower than 45# steel in dry conditions and 60 percent lower by weight loss than the composite of Ni-P-PTFE in oil.

Tribological Properties of Polytetrafluoroethylene(PTFE)Composite Coating on Carbon-Carbon Composites

Tribological Properties Of Polytetrafluoroethylene-Based Composite In Different Lubricant Media

Tribological Behavior of Carbon-Nanotube-Filled PTFE Composites

Friction and Wear Behavior of PTFE Coatings Modified with Poly (methyl Methacrylate)

Tribological Properties of Polytetrafluoroethylene-based Composites Filled with Graphite

A Study on the Mechanical and Tribological Properties of Carbon Fabric/PTFE Composites

Electroless Co-P-PTFE Composite Coatings

Synergistic Enhancement of the High-Temperature Friction and Wear Behavior of PTFE Matrix Composites with the Addition of CF, PEEK, and TiC

Enhanced Mechanical and Tribological Properties in Polyphenylene Sulfide/polytetrafluoroethylene Composites Reinforced by Short Carbon Fiber

Preparation and Tribological Properties of Hybrid PTFE/Kevlar Fabric Self-Lubricating Composites

The Friction and Wear Performance of Polytetrafluoroethylene Coating Reinforced with Modified Graphene

Hydrophobicity and Wear Resistance of Textured Carbon Fiber/Polytetrafluoroethylene Composite Coatings

The Tribological Performance Research of Modified Ptfe Composite Material

Tribological Properties of Modified Carbon Fabric/polytetrafluoroethylene Composites

Friction and Wear Behaviors of PTFE-based Composites Filled with Polymers

Antifriction and Wear Characteristics of Electrolessly-Deposited Ni–P with PTFE Composites

The Influence of Cu Coating Thickness of Powder of CCG on the Tribological Behaviors of Its PTFE Composites

Synergistic effects of carbon fiber and polytetrafluoroethylene on the friction and wear behavior of polyarylene ether nitrile under dry lubrication condition

Geometry Effect of Different PTFE Fillers on Self-Lubricating PF Composites: Mechanical and Tribological Properties

Interlocking Structure Formed by Multiscale Carbon Fiber–Polytetrafluoroethylene Fiber Hybrid Significantly Enhances the Friction and Wear Properties of Polyphenylene Sulfide Based Composites

Study of the tribological properties of carbon nanotubes filled PTFE composites