Abstract:Energy-harvesting internet-of-things devices must deal with unstable power input. Nonvolatile processors (NVPs) can offer an effective solution. Compact and low-energy arithmetic circuits that can efficiently switch between computation and backup operations are highly desirable for NVP design. This paper introduces a nonvolatile ferroelectric field-effect transistors (FeFET)-based sequential multiplier with the ability to do continued calculation after a power outage, thus achieving zero backup overhead. We exploit the unique characteristics of FeFETs to construct key components of a sequential multiplier. The multiplier relies on a FeFET-based adder and a new FeFET-based latch to achieve compact area and low operating energy. Moreover, it uses the hysteretic characteristic of FeFETs to realize the storage capability, and hence is able to store, at no extra cost, the intermediate data of an operation in a nonvolatile manner. This property provides support for continued computation when power supplies may be intermittent. Simulation results show that, assuming the same technology node, the proposed FeFET-based multiplier saves up to 21% and 19% area than a conventional CMOS-based sequential multiplier of 4-bits and 8-bits, respectively. It also saves 32% and 73% less area compared with a CMOS-based array multiplier. Furthermore, the proposed design can offer up to 32%/23% energy saving per operation compared with a 4/8-bit CMOS-based sequential multiplier.

Wideband Active Frequency Multiplier Designed with GaAs FET

High Quality Multiplier Design Based on Improved Circuits

Design of a fast multiplier used in 32Kb/s ADPCM

A Novel 3780-Point FFT Processor Scheme for the Time Domain Synchronous OFDM System

Optimized Iterative WFTA Method for the 3780-Point FFT Scheme

Design of low-power and high-speed multiplier

Nonvolatile and Energy-Efficient FeFET-Based Multiplier for Energy-Harvesting Devices.

A Multiplier Structure Based on A Novel Real-Time Csd Recoding

A 691 Mbps 1.392mm2 configurable radix-16 turbo decoder ASIC for 3GPP-LTE and WiMAX systems in 65nm CMOS

Design of Optimal Multiplierless FRM-Based Wideband Channelizer With STB

Design and Optimization of Turbo Decoder in WCDMA/HSDPA System

Design of a High-speed Frequency Multiplier Used in 2.5 Gbps Ethernet Transceiver

High Performance Parallel Turbo Decoder with Configurable Interleaving Network for LTE Application

Reverse Calculation-Based Low Memory Turbo Decoder for Power Constrained Applications

A Flexible Architecture For Turbo And Ldpc Codes

New Algorithms and Architecture for a Scalable Low-cost Dual-fields Modular Multiplier/Divider

Implementation of High-speed Parallel Multiplier Based on Optimized Partial Product

A common flexible architecture for Turbo/LDPC codes

A 1.5 Gb/s Highly Parallel Turbo Decoder for 3GPP LTE/LTE-Advanced.

A novel turbo product code decoder architecture with a compact candidate code set

The FPGA implementation of narrowband active noise control system