Abstract:Inspired by the driving muscles of the human arm, a 4-Degree of Freedom (DOF) concentrated driving humanoid robotic arm is proposed based on a spatial double parallel four-bar mechanism. The four-bar mechanism design reduces the inertia of the elbow-driving unit and the torque by 76.65% and 57.81%, respectively. Mimicking the human pose regulation strategy that the human arm picks up a heavy object by adjusting its posture naturally without complicated control, the robotic arm features an integrated position-level closed-form inverse solution method considering both geometric and load capacity limitations. This method consists of a geometric constraint model incorporating the arm angle ( φ ) and the Global Configuration (GC) to avoid joint limits and singularities, and a load capacity model to constrain the feasible domain of the arm angle. Further, trajectory tracking simulations and experiments are conducted to validate the feasibility of the proposed inverse solution method. The simulated maximum output torque, maximum output power and total energy consumption of the robotic arm are reduced by up to 2.0%, 13.3%, and 33.3%, respectively. The experimental results demonstrate that the robotic arm can bear heavy loads in a human-like posture, effectively reducing the maximum output torque and energy consumption of the robotic arm by 1.83% and 5.03%, respectively, while avoiding joints beyond geometric and load capacity limitations. The proposed design provides a high payload–weight ratio and an efficient pose control solution for robotic arms, which can potentially broaden the application spectrum of humanoid robots.

The Design and Implementation of Arm Wrestling Robot

The Design and Implementation of Natural Human-Robot Interaction System Based on Kinect Sensor

THE INFLUENCE OF TORQUE AND ELBOW POSITION ON WRIST ROTATE ANGLE RECOGNITION BASED SURFACE ELECTROMYOGRAM

The Arm Strength Training Machine with Biofeedback

Design of Kinect-Based Human Robot Interaction Systems for A Robocup Middle Size League Soccer Robot

Design of the Arm-Wrestling Robot’s Force Acquisition System Based on Qt

Design and Development of the Dual-Arm Robot DARO

The Design and Implementation of Arm Strength Training Machine

Bio-inspired Design and Inverse Kinematics Solution of an Omnidirectional Humanoid Robotic Arm with Geometric and Load Capacity Constraints

A novel human-robot interface based on low-cost sEMG device designed for the collaborative wearable robot

Design and Analysis of an Upper Limb Rehabilitation Robot Based on Multimodal Control

Deep Neural Network Approach in EMG-Based Force Estimation for Human–Robot Interaction

Design and Implementation of a 3 Degrees of Freedom Robotic Arm Powered by Pneumatic Artificial Muscle

Innovative Design Research on a Cable-Driven Humanoid Robotic Arm

Structure design and analysis of upper limb wearable passive power-assisted exoskeleton robot

Mapping Method of Human Arm Motion Based on Surface Electromyography Signals

Implementation and Comparison of Wearable Exoskeleton Arm Design with Fuzzy Logic and Machine Learning Control

All-Fabric Bi-directional Actuators for Multi-joint Assistance of Upper Limb

An EMG-Based Deep Learning Approach for Multi-DOF Wrist Movement Decoding

Advanced 2-DOF Counterbalance Mechanism based on Gear Units and Springs to Minimize Required Torques of Robot Arm

Design and Control of a Novel Six-Degree-of-Freedom Hybrid Robotic Arm