Abstract:With advancements in vacuum technology, the application range of vacuum circuit breakers has increased to high-voltage applications. When a vacuum circuit breaker breaks a high current, the vacuum arc type changes from diffusion to agglomeration. The energy transported from the arc column to the anode increases as the arc current and anode temperature increase to surpass the melting point of the anode material. Under extreme circumstances, an anode melting pool is formed; this influences the properties of the vacuum arc plasma between the electrodes and inhibits the strength recovery of the insulating medium, which increases the likelihood of breaking failure. Taking the arc region of an electrode with a diameter of 30 mm and a spacing of 10 mm as the basic simulation object, we developed a 2-D magnetohydrodynamic (MHD) model to simulate the properties of a high-current vacuum arc after anode melting pool formation. By changing the anode boundary conditions, different ablation conditions of the anode surface after the arc are analyzed, demonstrating that the pressure distribution of vacuum arc plasma is independent of the anode melting pool depth, diameter, and distance. The maximum pressure increases with an increase in the arc current. The maximum temperature of the vacuum arc plasma is positively correlated with the arc current, depth, and diameter of the melting pool and distance between the electrodes; however, it is independent of the presence of a melting pool on the cathode surface. When the edge of the melting pool produces bumps, the maximum temperature decreases and greater protrusion heights produce further temperature drops. These research results provide the theoretical basis for the improvement and development of vacuum circuit breakers.

Magnet Hydro Dynamic Model and Simulation of High-current Vacuum Arc

Research on supersonic and subsonic vacuum arc simulation

A 2-D Axisymmetric Magneto-Hydrodynamic Model of a DC Arc Plasma Torch and Its Solution Methodology

Modeling and Simulation of Vacuum Arc Plasma Transport Properties Under the Influence of Anode Melting Pool

Numerical simulation study on discharge characteristics of the dual hollow cathode plasma source using magnetic mirror field

Mode for the cathode mechanism in a transverse magnetic steered vacuum arc

DC Arc Numerical Calculations and Experimental Researches Based on the Arcing Horn Used in Over-head Line

Finite volume simulation of arc: pinching arc plasma by high-frequency alternating longitudinal magnetic field

Experimental Observation and Numerical Analysis of the Arc Plasma Axial Motion in a Magnetically Rotating Arc Plasma Generator

Simulating vacuum arc initiation by coupling emission, heating and plasma processes

Numerical Simulation and Experimental Investigation of the Influence of Gap Distance on Vacuum Arc Characteristics Between TMF Contacts

Three-dimensional numerical simulation of magnetically confined plasma cutting arc

Magnetohydrodynamics simulation of magnetic reconnection process based on the laser-driven Helmholtz capacitor-coil targets

Numerical Simulation of Gliding Arc Plasma Motion Characteristics

Simulation on multi-species vacuum arc considering both ionization-recombination and species diffusion processes

Numerical study on the effects of discharge parameters on vacuum arc plasma

Magnetohydrodynamic Numerical Study in a Supersonic Plasma Torch

Two-dimensional kinetic simulation of plasma dynamics in the post-arc stage of vacuum circuit breakers

Modeling of High-Gradient Vacuum Breakdown

Theoretical Model and Particle-in-Cell Simulation of Vacuum Magnetically Insulated Electron Flow With Off-Centered Cross Section