Embedded Industry Monitoring Network Data Base Service Based on UPnP

Tan, Dapeng,Li, Peiyu,Guan, Ruixia,Lin, Boyu

DOI: https://doi.org/10.1049/cp:20061135

2006-01-01

Abstract:Since the limitation of network architecture (NA) and real IP mechanism and good dynamic performance.

What problem does this paper attempt to address?

Intelligent Industry Monitoring Network Architecture Upnp Based

Tan Dapeng,Li Peiyu,Pan Xiaohong

IF: 1.019

2008-01-01

Chinese Journal of Electronics

Abstract:Aiming at poor self-adapting performance of Industry monitoring network (IMN) based on server/client mode, an intelligent IMN architecture realization method based on Universal plug and play (UPnP) was put forward. According to field distribution condition and running characteristics of industrial devices, topological IMN model centralized UPnP was established. Combining embedded system technology, monitoring information interaction mechanism was designed using signal communication method, and intelligent management for IMN was realized by the key data structures of Parameter configuration table (PCT) and Control device node (CDN). Industrial experiments prove that this method can realize the anticipated functions of seamless link, zero-configuration and self-recognition.
Networked manufacturing system based on UPnP

TAN Da-peng,LI Pei-yu,PAN Xiao-hong

2009-01-01

Computer Integrated Manufacturing Systems

Abstract:Aiming at the problems of Networked Manufacturing System(NMS) based on server/client pattern such as poor collaboration ability,shortage of dynamic configuration support etc,a kind of intelligent NMS realization method based on new generation network middleware-Universal Plug and Play(UPnP) was brought forward.By analyzing the construction characteristics and fundamental requirement of modern NMS,network system model oriented to automatic manufacturing was established,and the network architecture was designed and realized by UPnP technology.By applying standard communication protocol and application program interface of UPnP,device management criterion and data transform protocol were set up,and the intelligent management for NMS was realized by using UPnP service-calling mechanism.Combining with embedded system technology,real-time data collection node,monitoring center node and data storage server were designed to supply powerful real-time data support for NMS.Industry experiments proved that this system could realize self-recognition,seamless integration and other self-adaptive functions.
Status Monitoring and Fault Diagnosis Network System Based on Universal Plug and Play

TAN Da-peng,LI Pei-yu,PAN Xiao-hong

DOI: https://doi.org/10.3785/j.issn.1008-973x.2009.03.005

2009-01-01

Abstract:In order to resolve the problem of bad dynamic ability and poor versatility in the area of industry monitoring network technology(IMNT),an intelligent status monitoring and fault diagnosis network system(SFNS) based on a new network middleware,universal plug and play(UPnP),was proposed.The model for SFNS was established according to characteristics and requirements of IMNT,and the system network architecture was designed and realized to be centered at UPnP.Using the embedded system technology,real-time data collection node,monitoring center node and data storage server were designed,and they could supply powerful real-time data support for SFNS.By the UPnP event-subscription mechanism and internal communication interface,self recognition and seamless linkage were realized for the monitoring node,and the real-time remote monitoring was achieved by its gateway support.Industry fields experiments proved that this system had good self-adapting ability,and it could realize the intelligent management for monitoring network.
Study on Intelligent Industrial Monitoring Network Frame Based on UPnP

Li Peiyu,Tan Dapeng,Chen Shangjian,Ye Ruizhi

DOI: https://doi.org/10.3321/j.issn:1004-132X.2007.06.017

2007-01-01

Abstract:A kind of intelligent industrial monitoring network frame based on new generation network middleware-UPnP (universal plug and play) had been put forward based on lots of investigations and analyses of industrial monitoring technology at home and abroad. The characteristics and technical background of UPnP was represented, and its development prospect in industrial monitoring fields was discussed deeply. The model of industrial monitoring network frame was established and realized according to the special industrial demands. The industrial field experiments prove that it can realize good dynamic performance such as zero configuration, automatic recognition etc.
REAL-TIME MONITORING SYSTEM FOR THE STATES OF POWER NETWORK OVER ETHERNET AND ATM

严登俊,袁洪,高维忠,吴峰,鞠平

DOI: https://doi.org/10.3321/j.issn:1000-1026.2003.10.016

2003-01-01

Abstract:In present, the communication delay is uncertain and the number of the phase measurement unit (PMU) is limited in the supervisory and control system for dynamic stability. In order to make full use of the accuracy and high speed of computer network in data transmission, a transfer system for PMU data is built based on a combination of Ethernet and ATM. In the system, the communication delay, which is produced by the CSMA/CD in Ethernet, is reduced by using the Ethernet switch combined with the ATM switch. The error rate is also reduced because the program of the communication is programmed with the Windows Socket and TCP/IP protocol. Based on the fibre-optic telecommunication cable, a real-time transmission channel for the whole network phasor information is constructed. In the engineering practice, the system can transmit data one time in one circle to realize the real-time monitoring of the power network operation situation based on the PMU wide area measured data.
Study and Implementation of Power Plant Monitoring System Based on Intranet

刘长东,陈坚红,盛德仁,任浩仁,李蔚

DOI: https://doi.org/10.3969/j.issn.1005-006X.2003.01.024

2003-01-01

Abstract:A kind of real-time monitoring system is developed, which fits different DCS systems and has a good real-time performance. In this system, the display module runs in web browser as a ActiveX component, which makes it easy to maintain, and a system uses UDP data package to transmit data with a high real-time performance. The system structure and implement method of the real-time display system are introduced.
Status Monitoring and Fault Diagnosis Network System Based on UPnP

Pei-yu Li,Da-peng Tan,Tao-qing Zhou,Bo-yu Lin

DOI: https://doi.org/10.4028/www.scientific.net/kem.353-358.2632

2007-01-01

Key Engineering Materials

Abstract:Aiming at some problems in the fields of industry monitoring technology (IMT) such as bad dynamic ability and poor versatility, this paper brought forward a kind of intelligent Status monitoring and Fault diagnosis Network System (SFNS) based on UPnP-Universal Plug and Play. The model for fault diagnosis network system was established according to characteristics and requirements of IMT network, and system network architecture was designed and realized by UPnP. Using embedded system technology, real-time data collection node, monitoring center node and data storage server were designed, and that supplies powerful real-time data support for SFNS. Industry fields experiments proved that this system can realize self recognition, seamless linkage and other self adapting ability, and can break through the limitation of real IP address to achieve real-time remote monitoring on line.
EPA-based Open Network Control System

Dongqin Feng,Wenjun Huang,Jianxiang Jin,Jian Chu

DOI: https://doi.org/10.1109/icca.2003.1595168

2003-01-01

Abstract:The Ethernet is more and more used in the industrial environments. Because of the non-deterministic protocol of CSMA/CD, Ethernet is thought not to be suitable for the control of real time applications. With the worldwide application and development of Ethernet, its transmission rate is considered sufficiently high enough to estimate that all messages can be received inside a predefined temporal window. Especially, using Ethernet in industrial network will brings a lot of advantages: (1) consistency with the other communication systems installed in the enterprise; (2) employment of the same hardware all over the factory; (3) short cycle-times due to the high transmission speed; (4) large availability of chips implementing the MAC protocol, etc. In this paper, we first analyze the real-time capability of Ethernet and features of traffic for industrial network. Then, we propose some technologies for the design of an Ethernet-based real-time application. Finally, we present an EPA (Ethernet for Plant Automation)-based open network control system.
Study on the Embedded SPC System Based on LAN

Yin Jianjun,Yu Zhonghua,Wu Zhaotong

DOI: https://doi.org/10.1108/15982688200300014

2003-01-01

Asian Journal on Quality

Abstract:Statistical Process Control (SPC) is recognized as one of the most important tool of quality control (QC), an is one research focus in order to implement SPC quickly and effectively using computer technology and network environments. This paper proposes the principle and topology of embedded SPC based on the Internet/Intranet, emphatically discusses the embedded data sampling block, embedded network interface and SPC strategy. An example of application is given.
L3SN: A Level-Based, Large-Scale, Longevous Sensor Network System for Agriculture Information Monitoring

Yongcai Wang,Yuexuan Wang,Xiao Qi,Liwen Xu,Jinbiao Chen,Guanyu Wang

DOI: https://doi.org/10.4236/wsn.2010.29078

2010-01-01

Wireless Sensor Network

Abstract:We developed L 3 SN, a scalable, longevous, adaptive, and internet accessible wireless sensor network system for agriculture information monitoring, which is meticulously designed to meet the requirement of thousands hectares coverage, years of time monitoring and the adverse environment.The system architecture, the agriculture sensor device, the mesh protocol, and the web-based information processing platform are introduced.We also presented some implementation experience.The mesh protocol (LayerMesh) is highlighted, in which "stair scheduling" and "distributed dynamic load-balancing" are proposed to response the scalability, longevity and adaptivity requirements.We believe the design of L 3 SN is useful to many other large-scale, longevous applications such as hydrologic monitoring, geological monitoring etc.
Design Of Network-Based Distributed Industrial Monitoring System

N He,Jp Xiong,Cl Jiang,Hb Jia

2002-01-01

Abstract:An embedded system with Ethernet interface is designed to transfer the distributed acquisition data to the server, which plays the role of data storage and management. The service of delivering the raw data or data analysis statistics to the remote users is offered via network. The system hardware structure and software design are also presented in this paper. At the end of the paper, factors that affect the system performance are analyzed.
Research on Networked Manufacturing Resource Service Status Monitor

WANG Zheng-cheng,PAN Xiao-hong

DOI: https://doi.org/10.3969/j.issn.1001-2265.2006.11.031

2006-01-01

Abstract:After analyzed some technologies such as SOA and WebService,proposed resource status monitor mechanism which is used to networked manufacturing based on distributed、autonomous、heterogeneous environment.Researched some monitor method to meet different application needs.According to some key technologies relating the mechanism,such as how to name resource service and how to combine different resource service,provided corresponding solution to achieve the mechanism.
The Electrical Ethernet Monitoring System Based on Embedded Web Server

Jian-ming Jiang,Tong-guang Ni,Zheng-hua Ma,Zheng-wei Zhu

DOI: https://doi.org/10.1109/iccae.2010.5451844

2010-01-01

Abstract:In the monitoring system,the existing resource of Ethernet is used to remotely monitor power network parameters. A practical design of embedded Web server for power network monitoring is introduced, which applies high speed MCU (SX52BD) to conveniently link to Ethernet. Adopting Ethernet interface control mode, the remote network monitoring of power network is realized under Windows.
Development of an integrated wireless sensor network micro-environmental monitoring system.

Xianghui Cao,Jiming Chen,Yan Zhang,Youxian Sun

DOI: https://doi.org/10.1016/j.isatra.2008.02.001

IF: 7.3

2008-01-01

ISA Transactions

Abstract:Wireless Sensor Network (WSN) is increasingly popular in the field of micro-environmental monitoring due to its promising capability. However, most systems using WSN for environmental monitoring reported in the literature are developed for specific applications without functions for exploiting user’s data processing methods. In this paper, a new system is designed in detail to perform micro-environmental monitoring taking the advantages of the WSN. The application-oriented hardware working style is designed, and the system platform for data acquisition, validation, processing and visualization is systematically presented. Several strategies are proposed to guarantee the system capability in terms of extracting useful information, visualizing events to their authentic time are also described. Moreover, a web-based surveillance subsystem is presented for remote control and monitoring. In addition, the system is extensible for engineers to carry their own data analysis algorithms. Experimental results are to show the path reliability and real-time characteristics, and to display the feasibility and applicability of the developed system into practical deployment.
Intelligence-networked Automatic Instrumentation Based on an Embedded

韩冬,张宏建

DOI: https://doi.org/10.3969/j.issn.1000-0682.2004.03.003

2004-01-01

Abstract:Based on the application of high performance embedded system,this paper presents a new design conception for the co-design and main embedded CPUs on the market,and discusses the influence of embedded micro internet accessing technology and the application of RTOS on intelligent instruments.The trend of intelligentizing and networking of instruments is pointed out along with an introduction about an untelligentized and networked instrument based on PC104.
Improved Algorithm for UPnP Discovery in Smart Space

Zhi Wang,Jizhong Zhao

DOI: https://doi.org/10.1109/icsess.2012.6269518

2012-01-01

Abstract:The current UPnP service discovery algorithm can cause severe drops with response message rate when applied in pervasive computing environments with large scale of services. The deficiency lies in the instantaneous transmission of all response messages and the independent random selection of the transmission delay so that the response messages collide and congest. To reduce the congestion, a refined algorithm is developed which is based on unchanged the root device's discovery protocol, control point using multiple adaptive maximum query time (MX), to ensure that devices in the environment can be discovered. The simulation verifies that the refined algorithm gives better performance in the response message's drop ratio.
Home Appliance Management System for Monitoring Digitized Devices Using Cloud Computing Technology in Ubiquitous Sensor Network Environment

Yun Cui,Myoungjin Kim,Yi Gu,Jong-jin Jung,Hanku Lee

DOI: https://doi.org/10.1155/2014/174097

IF: 1.938

2014-02-01

International Journal of Distributed Sensor Networks

Abstract:The number of service techniques available for digitized home appliances is rapidly increasing as a result of various advances in digital technology. Users can now easily control and monitor home appliances via sensor networks formed among home appliances in ubiquitous environments. However, home appliances generate such large amounts of metadata about their status every month that in order to provide home appliance monitoring services to users, an approach that is able to store, analyze, and process these large amounts of metadata is needed. We propose a system that uses UPnP to collect metadata from home appliances and cloud computing technology to store and process the metadata collected from ubiquitous sensor network environments. Our proposed system utilizes a home gateway and is designed and implemented using UPnP technology to search for and collect device features and service information. It also provides a function for transmitting the metadata from the home appliances to a cloud-based data server that uses Hadoop-based technology to store and process the metadata collected by a home appliance monitoring service.

computer science, information systems,telecommunications
Design and Implementation of Monitoring LAN Based on Web Administration

王东滨,方滨兴,云晓春

DOI: https://doi.org/10.3969/j.issn.1000-3428.2002.10.079

2002-01-01

Abstract:The paper presents the method that monitors the behaviors of the users to the Internet, including the visited station, time and so on, and adopts Web-based management mode. The design of the architecture based on C/S and the technique of the information management and the packet capture are implemented.
A Network Resource Monitoring Framework Based on XML and P2P

Jianping Wu

2007-01-01

Abstract:It is a difficult task to monitor network resource in the Next Generation Internet.P2P technique is increasingly used in the security and service integration,furthermore,XML can allow for the interchange of data between applications using different information models.This paper has put forward a novel Network Resource Monitoring Framework based on XML and P2P in the monitoring of CERNET2(China Education and Research Network based on IPV6),and the key technologies about resource description and resource location for the implementation of the monitoring system based on the framework are also given in this paper.
Research on a Network of Real-Time Monitoring in the Industrial Fields

JIANG Yu,BAI Xing-yu,ZHAO Chun-hui

DOI: https://doi.org/10.3969/j.issn.1009-671x.2005.04.005

2005-01-01

Abstract:In order to solve the scheduling in large petrochemical enterprises, a real-time scheme to monitor whole procedure of production by LAN is proposed in this paper. A reliable frame-based communication mechanism is also designed.A real-time communication with various industrial control software is implemented through DDE technology .In the LAN programming,Activex object Winsock and UDP protocol are used.This scheme has been realized in Harbin Petrochemical Enterprise.The result proves that performance is satisfactory.

Embedded Industry Monitoring Network Data Base Service Based on UPnP

Intelligent Industry Monitoring Network Architecture Upnp Based

Networked manufacturing system based on UPnP

Status Monitoring and Fault Diagnosis Network System Based on Universal Plug and Play

Study on Intelligent Industrial Monitoring Network Frame Based on UPnP

REAL-TIME MONITORING SYSTEM FOR THE STATES OF POWER NETWORK OVER ETHERNET AND ATM

Study and Implementation of Power Plant Monitoring System Based on Intranet

Status Monitoring and Fault Diagnosis Network System Based on UPnP

EPA-based Open Network Control System

Study on the Embedded SPC System Based on LAN

L3SN: A Level-Based, Large-Scale, Longevous Sensor Network System for Agriculture Information Monitoring

Design Of Network-Based Distributed Industrial Monitoring System

Research on Networked Manufacturing Resource Service Status Monitor

The Electrical Ethernet Monitoring System Based on Embedded Web Server

Development of an integrated wireless sensor network micro-environmental monitoring system.

Intelligence-networked Automatic Instrumentation Based on an Embedded

Improved Algorithm for UPnP Discovery in Smart Space

Home Appliance Management System for Monitoring Digitized Devices Using Cloud Computing Technology in Ubiquitous Sensor Network Environment

Design and Implementation of Monitoring LAN Based on Web Administration

A Network Resource Monitoring Framework Based on XML and P2P

Research on a Network of Real-Time Monitoring in the Industrial Fields