Large Eddy Simulation of Gas Flow in a Pipe with Near Wall Jet Excitation

XIANG Ping,GUO Yin-cheng

DOI: https://doi.org/10.3969/j.issn.1007-4708.2006.01.016

2006-01-01

Abstract:Large eddy simulation is performed to study the gas flow with near wall jet excitation in a pipe.One equation sub-grid scale(SGS) model is used for modeling sub-grid turbulence.Transport equation of passive scalar is also solved in order to perform numerical visualization of flow field.Computation is performed on a uniform grid system of 1027×45 nodes in the axial direction and radial direction respectively.The time integration of governing equations has been done with a second-order Adams-Bashforth scheme.The 2nd order finite difference scheme is used in space directions.Numerical simulation is performed by using Chorin's fractional step method.Buneman variance of cyclic odd-even reduction algorithm is adopted for solving pressure correction Poisson equation.Simulation results give detailed information of transient behaviors of coherent structures at different evolution periods of turbulent channel flow.The effect of velocity disturbance on the evolution of coherent structures is also investigated.It is found that vortex roll-up process is initiated by the Kelvin-Helmholtz instability.With the increase of jet intensity,the size of the vortex is enlarged.Besides,there is a recirculation zone in the upstream of the jet excitation,and the recirculating flow changes stronger as the intensity of jet excitation increasing.With the jet velocity increasing,the shear stress at the wall can be reduced,and it will reaches to nearly zero value when the velocity of jet exceeds the main flow velocity.So,the jet excitation can reduce the drag force between the gas flow and the wall of the pipe.On the other hand,the velocity of gas flow in the near wall region is also reduced.This will give rise to reducing the ability of solid particles moving upward carried by gas phase in the fluid catalytic cracking(FCC) process,then it will cause solid particles and oil back-mixing in the near wall region of a riser,which will cause over-cracking and decrease the reaction selectivity.