Sensitivity analysis and correction algorithms for atmospheric CO2 measurements with 1.57-µm airborne double-pulse IPDA LIDAR
Yadan Zhu,Jiqiao Liu,Xiao Chen,Xiaopeng Zhu,Decang Bi,Weibiao Chen
DOI: https://doi.org/10.1364/OE.27.032679
2019-10-28
Abstract:In this study, a 1.57-µm airborne double-pulse integrated-path differential absorption (IPDA) light detection and ranging (LIDAR) system was developed for CO2 measurements. This airborne IPDA LIDAR is integrated with a real-time frequency monitoring system, an integrated sensor for temperature, pressure, and humidity, an inertial navigation system, and a global positioning system. The random errors of the LIDAR system, which are caused by the signal noise, background noise, and detector noise, among other factors, are analyzed for different target reflectivities at a flight altitude of 8 km. After parametric optimization, the signal is unsaturated at high target reflectivity. Further, it can be detected at low target reflectivity by adjusting the detector gain. After the averaging of 148 shots, the relative random error (RRE) was 0.057% for a typical target reflectivity of 0.1 sr-1. Moreover, the systematic errors caused by the laser pulse energy, linewidth, spectral purity, and frequency drift, as well as the atmospheric parameters related to the flight experiments are also investigated. The relative system error (RSE) was 0.214% as determined based on an analysis of the systematic errors, which are primarily caused by the frequency drift. Two methods are proposed to reduce the RSE caused by the frequency drift. The first is the averaging of 148 shots, which can reduce the RSE to 0.096%. The other method involves calculating the integral weight function (IWF) using real-time frequency. However, this is a time-consuming and computationally intensive process. Hence, look-up tables for the absorption cross-section were created to overcome this issue, resulting in a decrease in the RSE to 0.096%. Using actual aircraft attitude angles, velocity, and position data from flight experiments, the relative errors (REs) in the IWF caused by the uncorrected integral path and Doppler shift were determined to be 0.273% and 0.479%, respectively. However, it was found that corrections to the integral path and Doppler shift based on accurate calculations of the IWF cause the airborne platform to turn in such a way that the REs are eliminated. Hence, this study confirms the validity of system parameters and provides a reference for other researchers who study similar IPDA LIDAR systems. Further, the sensitivity analysis of the airborne IPDA LIDAR system can provide a reference to future data inversions. Moreover, the proposed correction algorithms for the integral path and Doppler shift contribute to more accurate inversion results.