Abstract:Optimal fixture configuration is critical to minimise the machining distortion of the workpiece. This study presented an approach for optimisation of fixturing configuration in flexible machining fixtures. Herein, a flexible fixture system composed of adaptive clamping unit, locating unit, and auxiliary locating unit was investigated. Response surface methodology (RSM) was employed to describe the relationship between fixturing parameters (distance between two zero-point fixtures m 1, the clamping force of float fixture m 2, and quantity of float fixture m 3) and machining distortion. Furthermore, sensitivity analysis was implemented to evaluate the effects of fixturing parameters on machining distortion. Adaptive penalty function (APF) was constructed to search optimal settings of fixturing parameters. Comparative analysis of different optimal fixturing parameters obtained by RSM and APF was conducted. Single-sided component was adopted to validate the effectiveness of the proposed approach. Machining distortion was found to first decrease and then increase with the augment of m 1 and it reduced with the increment of m 2 and m 3. Besides, m 3 exhibited the greatest influence on machining distortion, 61.78%. The interaction between m 2 and m 3 resulted in the lowest influence, 0.019003%. Furthermore, the maximum machining distortion through optimised flexible clamping was only 0.312 mm, which reduced by 57.6% compared to traditional clamping.

Modeling and Optimal Design of Fixture Clamping Scheme

Finite Element Simulation for Optimal Clamping Scheme of Thin-Walled Workpiece in Milling Process

Finite Element Model for Optimal Clamping Scheme of Frame Shape Workpiece Based on Residual Stress Distribution

Kinematic Chain Optimization Design Based on Deformation Sensitivity Analysis of a Five-Axis Machine Tool

Clamping Technology Optimization of High Speed Machining of NOMEX Honeycomb Core Based on Milling Force Model

Automated modular fixture planning based on linkage mechanism theory

Investigation of Moving Fixture on Deformation Suppression During Milling Process of Thin-Walled Structures

The Geometric Principle of Automatic Modular Fixture Planning

Finite Element Analysis of Displacement Performances of Flexure Hinge Mechanism Affected by Machining Errors

An approach for optimising the fixturing configuration in flexible machining fixtures

Numerical Analysis on the Clamping Reliability of Fixture-Workpiece Facility Considering Partial Slip

Research on Rapid and Accurate Fixture Design for Non-Intervention Machining of Complex Parts

An integrated approach for optimal fixture layout design

Prediction of clamping deformation in vacuum fixture–workpiece system for low-rigidity thin-walled precision parts using finite element method

Advanced Fixture Design Method and Its Application

Optimization Method of Floating Fixture Layout for Distortion Control of Low-Stiffness Thin-Walled Beams

Machining fixture and deformation control of aero-engine thin-walled casing

Quality Design of Fixture Planning for Sheet Metal Assembly

Research on fixture design for free-form workparts

Optimized Design of Flexible Quick-Change System Based on Genetic Algorithm and Monte Carlo Method

A Rapid Design Method of Anti deformation Fixture Layout for Thin Walled Structures