Abstract:With the extensive application of industrial computed tomography in the field of non- destructive testing, how to improve the quality of the reconstructed image is receiving more and more concern. It is well known that in the existing cone-beam filtered backprojection reconstruction algorithms the cone angle is controlled within a narrow range. The reason of this limitation is the incompleteness of projection data when the cone angle increases. Thus the size of the tested workpiece is limited. Considering the characteristic of X-ray cone angle, an improved cone-beam filtered back-projection reconstruction algorithm taking account of angular correction is proposed in this paper. The aim of our algorithm is to correct the cone-angle effect resulted from the incompleteness of projection data in the conventional algorithm. The basis of the correction is the angular relationship among X-ray source, tested workpiece and the detector. Thus the cone angle is not strictly limited and this algorithm may be used to detect larger workpiece. Further more, adaptive wavelet filter is used to make multiresolution analysis, which can modify the wavelet decomposition series adaptively according to the demand for resolution of local reconstructed area. Therefore the computation and the time of reconstruction can be reduced, and the quality of the reconstructed image can also be improved. Introduction: With the development of non-destructive testing, how to efficiently utilize the cone-beam projections to reconstruct 3-D images is more and more important. In practice, it is convenient to control the mechanical system and the complexity of the whole system is reduced when single-circle trajectory is adapted. Therefore the single-circle trajectory is investigated in our research. FDK algorithm (1) is most popular when using single-circle trajectory, which is a approximation reconstruction algorithm including filtering and backprojection. However, FDK algorithm does not satisfy the necessary and sufficient condition for reconstruction which is

Filtered Back-Projection Algorithm of Deflection Tomography and Error Analysis

Direct Filtered-Backprojection-Type Reconstruction from A Straight-Line Trajectory

Generalized Backpropagation Algorithms for Diffraction Tomography

Two-Stage Denoise Technique for Deflectometric Tomographic Reconstruction of Flow Field

Deep Learning Computed Tomography based on the Defrise and Clack Algorithm

Filtered Backprojection Algorithms Enable Linear Scanning Computed Tomography High-Quality Reconstruction With Large Extended FOVs

AN IMPROVED CONE-BEAM FILTERED BACKPROJECTION RECONSTRUCTION ALGORITHM BASED ON X-RAY ANGULAR CORRECTION AND MULTIRESOLUTION ANALYSIS

Backprojection-Filtration Reconstruction for Helical Cone-Beam Ct with Curved Detectors

Minimal-scan Filtered Backpropagation Algorithms for Diffraction Tomography

A Fast Regularized Iterative Algorithm for Fan-Beam CT Reconstruction.

Deep Filtered Back Projection for CT Reconstruction

Tikhonov Regularization Method for Deflectometric Tomographic Reconstruction

Asymmetric Fan-Beam Configurations with Spatially Varying Focal Lengths and Shift-Variant Filtering Reconstruction

A cone-beam tomography system with a reduced size planar detector: a backprojection-filtration reconstruction algorithm as well as numerical and practical experiments.

3D reconstruction algorithm for cone-beam differential phase contrast computed tomography

Image Reconstruction With Shift-Variant Filtration And Its Implication For Noise And Resolution Properties In Fan-Beam Computed Tomography

Radon Transform Iteration Based on Beam-Deflection Optical Tomography

A Parallel Backprojection Algorithm for Spiral Cone-Beam CT Exact Reconstruction.

An improved exact filtered backprojection algorithm for spiral computed tomography

Generalized Fourier Diffraction Theorem and Filtered Backpropagation for Tomographic Reconstruction

Accelerated Reconstruction For Inverse Geometry Ct Via Derivative Back-Projection Filtration