Abstract:The separation flow pattern in compressor corners is well known but its nature is not fully understood. In this paper, the numerical simulation based on hybrid LES/RANS was performed to improve our understanding about the unsteady separation structure and its dynamic mechanisms of compressor corner flows, subject to a range of incoming flow incidences. In the simulation, the attached boundary layer near the walls was modeled by RANS, while the large separated flows in the corner were resolved by LES. The simulation was carefully validated by the experimental data before flow physics investigation. The unsteady separation structures and its effects were then investigated step by step, from phenomena observation to mechanisms analysis. First, the overall separation behavior and its associated flow physics was visualized and analyzed. It was found that the unsteady separation structure was distinct from the steady view. Some additional vortex structures, normally smeared out in the steady averaging process, were crucial in the unsteady dynamic process. These small but critical vortices corresponded to large intermittency in the separation size and strength. As the incidences increased, the vortex structure became much more complex due to the enhanced interaction of these vortices. Second, the turbulence behavior was examined in the separated regions. Anisotropy and non-equilibrium of turbulence were found to be dominant in the separation region due to non-homogenous shear of the separated flow. It posed a big challenge for conventional RANS prediction. Finally, the unsteadiness of corner separated flows was fully analyzed over a range of incidences. It was found that the unsteadiness came from two sources: the suction side separation and the wake shedding. The unsteadiness increased with the incidences. The two unsteady sources interacted with each other at high incidences, which led to a big unsteady resonance structure near the blade trailing edge. The resonance was responsible for a large pressure variation, implying the enhanced noise generation near the blade trailing edge.

Influence of Incidence on Secondary Vortex in the Compressor Cascade

Numerical Study of the Effect of Secondary Vortex on Three-Dimensional Corner Separation in a Compressor Cascade

The numerical simulation of vortices structure in compressor cascade with curved blades

An Investigation on Separation Configurations in Compressor Cascades with Boundary Layer Suction (BLS)

Aerodynamic Interaction Between Incoming Vortex and Tip Leakage Flow in a Turbine Cascade

Frequency Analysis of Three Dimensional Compressor Cascade Unsteady Flow Mechanism Research

Blade Aerodynamic Force and Tip Region Vortex Spatial-temporal Evolution Study of a Compressor Cascade

Frequency Analyses for Mechanism Research of Unsteady Flow Inside Three Dimensional Compressor Cascade

PIV investigation on corner separation control in a compressor cascade based on a vortex generator

Numerical Study of the Secondary Flow in Steam Turbine Static Cascade under Varying Conditions

Vortex Generator Evaluation Models and Flow Mechanisms for Compressor Cascade

Numerical Study of the Unsteady Flow in a Plane Compressor Cascade

Numerical Study on the Influence of Inlet Turbulence Intensity on Turbine Cascades

Unsteady Mechanisms Of Compressor Corner Separation Over A Range Of Incidences Based On Hybrid Les/Rans

Separation Control Using Synthetic Vortex Generator Jets in Axial Compressor Cascade

Numerical Study of Mechanism of U-shaped Vortex Formation

Impact of Slots on the Aerodynamic Performance of the Variable Inlet Guide Vane Cascade of a Centrifugal Compressor

Numerical analysis of vortex and cavitation dynamics of an axial-flow pump

Numerical Investigation of Flow Evolution in Centrifugal Compressors During Surge

Vorticity Dynamics in Axial Compressor Flow Diagnosis and Design—Part II: Methodology and Application of Boundary Vorticity Flux

Numerical investigation of cavitation-vortex interaction in a mixed-flow waterjet pump