Abstract:As light and efficient large-span space structures, beam string structures have been widely used since the 1980s. Within them, cables are the main force-bearing component; their level of tension determines the overall stiffness, performance and structural safety of the beam string structures. Real-time monitoring of the cable force during the construction and service periods is an important and effective measure to ensure the safety of the cable structure. At present, the vibration method is widely used in nearly all common engineering practices for cable force identification/monitoring because of its simplicity and efficiency. However, the vibration of the cable segment will be affected by the whole structure, so the cable force-frequency relationship based on the simple single cable model cannot meet the accuracy requirement of cable force identification of the beam string structure. Therefore, in this paper, through finite element simulation and theoretical analysis, a three-stage criterion is proposed to develop a new method for obtaining the local modal information of the tensioned cable segment where the influence of the overall structure is considered. The new method’s performance was compared with the results obtained by the vibration method according to the single-cable model assumption, and the design values of the cable forces. The magnitude of the error in the identification of the tension force of the beam string structure according to the single-cable model was studied to provide a correction method, so that the single-cable model assumption can be used to improve the measuring efficiency and ensure the solution accuracy. The numerical results show the effectiveness of the proposed method. The work of this paper provides a new approach for improving the identification accuracy of the vibration method of a complex cable system such as the beam string structure and is a useful discussion on the vibration method of complex cable systems.

Vibration Method for Measurement of Cable Tension

Application of Wireless Cable Force Measurement System of Cable Structures

Field measurement of wind pressure and wind-induced vibration of large-span spatial cable-truss system under strong wind or typhoon

Design and Experimental Investigations of a Vibration Based Wireless Measurement System for Bridge Cable Tension Monitoring

Measuring Methods of Cable Tension in Cable-Stayed Bridges

Estimation of Main Cable Tension Force of Suspension Bridges Based on Ambient Vibration Frequency Measurements

Monitoring of the Internal Force of the Flexible Components by Vibration Method

A Real-Time Monitoring System for Cable Tension with Vibration Signals Based on an Automated Algorithm to Sieve Out Reliable Modal Frequencies

COMPARATIVE ANALYSIS OF MEASURING METHODS OF CABLE TENSION FORCES IN CABLE-STAYED BRIDGES

A New Measuring Method of Tension in Cable and Its Experimental Verification

Comparative Field Study of Cable Tension Measurement for a Cable-Stayed Bridge

A three-stage criterion method for extracting local vibration modes of tensioned cables in beam string structures

A vision-based method for estimating shallow cable tension via vibrational properties

Data Processing of Vibration Signals for Cable Tension Estimation

Wireless Measurement System of Cable Tension Force Based on Labview

Evaluation of Cable Tension Forces Using Vibration Method for a Cable-stayed Bridge under Construction

Research on Stay Cable Tension Estimation Based on Vision-Based Monitoring System

Development of a Low-Cost Automated Tension Estimation System for Cable-Stayed Bridges

Development of an Automated Wireless Tension Force Estimation System for Cable-Stayed Bridges

Measurement of Cable Force through a Fiber Bragg Grating-Type Thin Rod Vibration Sensor and Its Application

A Novel Approach for Cable Tension Monitoring Based on Mode Shape Identification