Abstract:Passive isolation has been widely accepted as an effective means for the protection of structures against seismic hazards. The isolation bearings, typically placed at the base of the structure, increase the flexibility of the structure and shift its fundamental frequency away from the dominant frequency of seismic excitations, resulting in significantly reduced interstory drifts and floor accelerations. During severe earthquakes, the performance of passive isolation systems is usually achieved at the expense of having large base displacements. Alternatively, active isolation combines isolation bearings with adaptive actuators to effectively mitigate the base displacements, while maintaining reasonable interstory drifts and floor accelerations. Despite successfully theoretical proof documented in previous studies, most experimental implementations only verified active isolation with unit-axial actuators under unidirectional excitations. Earthquakes are intrinsically multidimensional, resulting in out-of-plane responses such as torsional responses. Therefore, the focus of this paper is the development and experimental verification of active isolation strategies for multistory buildings subjected to bidirectional earthquake loadings. First, a model building is designed to be dynamically similar to a representative full-scale structure. The selected isolation bearings feature low friction and high vertical stiffness, providing stable behavior. In the context of the multidimensional response control, three custom-manufactured and appropriately scaled actuators are employed to mitigate both in-plane and out-of-plane responses. In addition, the structure is subjected to multi-directional earthquake ground motion. To obtain a high-fidelity model of the active isolation systems, the authors propose a hybrid identification approach, which combines the advantages of the lumped mass model and nonparametric methods. Control-structure interaction is also included in the identified model to further enhance the control authority. By employing the H-2/LQG control algorithm, the controllers for the hydraulic actuators are shown to offer high performance and good robustness. Active isolation is found to possess the ability to reduce base displacements and produce comparable accelerations and interstory drifts to passive isolation. The proposed active isolation strategies are validated experimentally for a six-story building tested on the six-degree-of-freedom shake table in the Smart Structures Technology Laboratory at the University of Illinois at Urbana-Champaign. Copyright (c) 2013 John Wiley & Sons, Ltd.

Simulation Study of Active Control Based on Quadratic Stabilization Algorithm

Stochastic minimax semi-active control for MDOF nonlinear uncertain systems under combined harmonic and wide-band noise excitations using MR dampers

Non-linear stochastic optimal control for coupled-structures system of multi-degree-of-freedom

Algorithm and Simulation for Structural Active Control with Function of Attenuating Earthquake

Feedback Control Optimization for Seismically Excited Buildings

Seismic Response Mitigation of Adjacent High-Rise Structures Via Stochastic Optimal Coupling-Control

Stochastic optimal coupling-control of adjacent building structures

A Novel Robust Optimum Control Algorithm and Its Application to Semi-Active Controlled Base-Isolated Structures

Stochastic optimal control of coupled structures

Semi-active optimal control of linearized systems with multi-degree of freedom and application

An improved optimal control algorithm and its application to smart seismic isolated building

A minimax stochastic optimal semi-active control strategy for uncertain quasi-integrable Hamiltonian systems using magneto-rheological dampers

Experiments on Active Control of Multi-Story Structure Using Static Output Feedback

Experimental Study of Active Control for MDOF Seismic Structures

STOCHASTIC OPTIMAL CONTROL OF ADJACENT COUPLED TALL BUILDINGS UNDER SEISMIC EXCITATION

Simulation of Vibration Control for Irregular Buildings Using Semi- Active Friction Dampers

Stochastic Optimal Control of Wind-Excited Tall Buildings Using Semi-Active Mr-Tlcds

Multiaxial Active Isolation for Seismic Protection of Buildings

Experiments on Active Control of Seismic Structures

Variable fractional order sliding mode control for seismic vibration suppression of building structure

Semi-Active Control for Benchmark Building Using Innovative TMD with MRE Isolators