Abstract:Ultrasound-assisted extraction is compared with slurry sampling and microwave-assisted acid digestion for the determination of cadmium, lead and copper in biological samples and cadmium in sediment samples by electrothermal atomic absorption spectrometry (ETAAS). The main advantage of using an ultrasound-assisted extraction in comparison to slurry sampling is a doubling of the tube lifetime for all the chosen analytes, most likely because the sample matrix was not introduced into the atomiser, avoiding the build up of carbonaceous residues or silicates on the graphite platform. Consequently the analytical variable costs were remarkably diminished. In comparison to microwave-assisted digestion, ultrasound-assisted extraction resulted typically in a two-fold better precision and better detection limits. For the extraction, slurries in nitric acid were sonicated for 2–5 min using a titanium probe. Subsequently, the solid phase was separated by centrifugation, and 20 µl of the liquid phase was introduced into a graphite tube previously treated with a W–Rh permanent modifier. For slurry sampling, the slurries were sonicated for 20 s before being delivered to the W–Rh treated platform. Nitric acid concentration, sonication time, sonication power, sample mass and particle size were optimised for each analyte to obtain quantitative recoveries. For cadmium the optimum conditions (sediments and biological materials) were, 0.2–3.0% m/v slurry, 0.5% HNO3, 2 min sonication at 15 W. For copper and lead (biological materials only) the optimum conditions were 0.2–2.0% m/v slurry, 5.0% HNO3, 5 min 35 W. The particle size chosen for all analytes was <30 µm. For biological materials, the extraction recoveries were: Cd, 95–105%; Cu, 90–101%; and Pb, 88–98%. However, only cadmium was quantitatively extracted (based on the certified values of the reference materials) from sediment samples (recoveries 92–95%). For Pb and Cu the maximum recoveries attained were 54% and 60% respectively. Detection limits, based on integrated absorbance for the extracts of a 2.5% m/v biological material were: Cd, 3.0 ng g−1; Cu, 88 ng g−1; and Pb, 55 ng g−1. For 0.5% m/v sediment the cadmium detection limit was 15 ng g−1.

An Octadecyl Immobilized Silica Beads Packed Microcolumn Versus Polytetrafluoroethylene Knotted Reactor for Cd(Oh)(2) Precipitate Collection Coupled to Electrothermal Atomic Absorption Spectrometry for Cadmium Screening

Octadecyl immobilized surface for precipitate collection with a renewable microcolumn in a lab-on-valve coupled to an electrothermal atomic absorption spectrometer for ultratrace cadmium determination.

A Sequential Injection On-Line Column Preconcentration System for Determination of Cadmium by Electrothermal Atomic Absorption Spectrometry

Investigation of Dispersive Solid-Phase Extraction Combined with Slurry Sampling Thermospray Flame Furnace Atomic Absorption Spectrometry for the Determination of Cadmium

On-line Precipitation–dissolution in Knotted Reactor for Thermospray Flame Furnace AAS for Determination of Ultratrace Cadmium

Solid-phase extraction and preconcentration of cadmium(II) in aqueous solution with Cd(II)-imprinted resin (poly-Cd(II)-DAAB-VP) packed columns

Study on Spectrophotometric Method for Determination of Trace Cadmium after Flotation Separation Using Microcrystalline Adsorption System

Polytetrafluorethylene Membrane-Based Liquid Three-Phase Micro Extraction Combined with in situ Differential Pulse Anodic Stripping Voltammetry for the Determination of Cadmium Ions Using Au-Nanoparticles Sol-Gel Modified Pt-Wire

Chromatographic behavior of cadmium in an ion-pair reversed-phase micro HPLC system and its application to the determination of bio-available cadmium in soil samples

Combination of Knotted Reactor with Portable Tungsten Coil Electrothermal Atomic Absorption Spectrometer for On-Line Determination of Trace Cadmium

On-line separation and preconcentration of trace cadmium in environmental water samples by micro column filled with modified nanometer Si-HAP prior to FAAS determination

On-line Micro-Packed Column Solid-Phase Extraction of Cadmium Using Metal-Organic Framework (MOF) UiO-66 with Posterior Determination by TS-FF-AAS

An efficient Cd two-stage column system for high-precision determination of Cd isotopic compositions by double spike MC-ICP-MS

Determination of Bioavailable Cadmium in Environmental Samples by Ip-Rp-Hplc Coupled with On-Line Fluorescence Assay

Selective quantification of trace palladium in road dusts and roadside soils by displacement solid-phase extraction online coupled with electrothermal atomic absorption spectrometry.

Cloud Point Extraction–thermospray Flame Quartz Furnace Atomic Absorption Spectrometry for Determination of Ultratrace Cadmium in Water and Urine

Study on the Separation of Tellurium from Cadmium in Aqueous Media using Nano-Particles Micro-Column

Adsorption studies of cadmium onto magnetic Fe3O4@FePO4 and its preconcentration with detection by electrothermal atomic absorption spectrometry

Flow Injection On-Line Coprecipitation Preconcentration for Electrothermal Atomic Absorption Spectrometry

Ultrasensitive Determination of Cadmium in Seawater by Hollow Fiber Supported Liquid Membrane Extraction Coupled with Graphite Furnace Atomic Absorption Spectrometry

Comparison of ultrasound-assisted extraction, slurry sampling and microwave-assisted digestion for cadmium, copper and lead determination in biological and sediment samples by electrothermal atomic absorption spectrometry