Petr 46-Development Of Ethylene Glycol Monomethyl Ether Soyate As A Novel Biodiesel

Hejun Guo,Shenghua Liu,Longbao Zhou,Yanfeng Gong,Hongyun Zhang,Dayong Jiang
2006-01-01
Abstract:Research on clean energy resources for modern automotive engines has been attached great importance in recent years. Biodiesel has been well known as one of the alternative fuels of the like for diesel engine, which is able to burn completely during engine operation and thereby can give rise to a significant smoke reduction. Currently, biodiesel is prepared through transesterification of vegetable oils or fatty oils with methanol and ethanol. However, since there is only one ester group, i.e. two oxygen atoms existing in each biodiesel molecule, the oxygen content in conventional biodiesel is at comparatively lower level. Consequently, the reductions in exhaust emissions are not just significant when diesel engine is fueled with neat biodiesel, especially when it burns diesel fuel mixed with a biodiesel as an additive. In the present paper, a novel biodiesel, ethylene glycol monomethyl ether soyate, has been developed. The new biodiesel was synthesized through transesterification reaction lasting for about 2 hours using a refined acid-free soybean oil and ethylene glycol monomethyl ether as reactants at a temperature of 90°C with Na as catalyst. Its structure was identified as anticipated through FT-IR, 1H NMR, and LC-MS analyses. Engine test results show that when a tested diesel engine is fueled with this biofuel, engine-out smoke emissions can be decreased by 54.7% to 85.7%, CO emissions reduced by up to 79.1% and unburned HC emissions lessened by 61.6%. When the diesel engine combusts its mixture with a diesel fuel in a proportion of 1:1 by volume, smoke emissions can be diminished by 46.5% to 83.3%, CO decreased by up to 69.8% and HC emissions reduced by 59.6%. NOx emissions generally do not change significantly. Power output generally drops by 11.5%, fuel consumption increases by 11.9% to 13.4%.
What problem does this paper attempt to address?