Abstract:The morphology-controlled synthesis of SnO2 hollow/nanoporous nanostructures (nanotubes, urchin-like morphologies and nanospheres) was achieved via a template-engaged replacement reaction at a mild temperature (lower than 80 degrees C). The formation mechanism of hollow interior and nanoporous walls for the obtained SnO2 nanostructures (SnO2 nanotubes were used as an example) was investigated based on TEM and HRTEM observations during different reaction stages. It is found that bridge voids firstly form at the MnO2/SnO2 interface, followed by the inward development of voids before the MnO2 core is completely consumed. Two types of short-circuited galvanic cells, MnO2/Mn2+ rSnO(2)/Sn2+ and concentration cell-SnO2/Sn2+ (interior) rSnO(2)/Sn2+ (exterior), are probably responsible for the formation of SnO2 nanotubes and outward growth of SnO2 along MnO2. Moreover, the calculation result of the outer diameter of SnO2 nanotubes is in good agreement with the observation results by SEM and TEM. When evaluated as anodes for lithium ion batteries (LIBs), the three SnO2 nanostructures exhibit superior rate capability and cycling performance. Especially, SnO2 nanotubes present the best rate capability: specific capacities of above 800 mA h g(-1) at 200 mA g(-1) and about 500 mA h g(-1) at 4000 mA g(-1) were achieved, respectively. Importantly, the 1D morphology of SnO2 nanotubes can be well preserved after prolonged cycling at a relatively high current density, indicating good structural stability of the resulting nanotubes during the Li+ insertion/extraction process. These results indicate that the obtained SnO2 hollow/nanoporous nanostructures would be promising anode materials for next-generation LIBs.

Preparation And Electrochemical Properties Of Nano-Sno By Sol-Gel Technique

Self-templated Porous Hierarchical SnO2 Ceramics with Enhanced Lithium Storage Capacity

Preparation and electrochemical properties of nanosized tin dioxide electrode material by sol-gel process

Preparation and electrochemical Na-storage property of SnSe2 nanosheets

Carbon-Coated SnS Nanosheets Supported on Porous Microspheres as Negative Electrode Material for Sodium-Ion Batteries

Structural and electrochemical properties of a porous nanostructured SnO2 film electrode for lithium-ion batteries

Preparation and Electrochemical Performances of Nanoscale FeSn2 As Anode Material for Lithium Ion Batteries

One-step Hydrothermal Reduction Synthesis of Tiny Sn/SnO2 Nanoparticles Sandwiching Between Spherical Graphene with Excellent Lithium Storage Cycling Performances

Preparation, characterization and electrochemical Li-absorption/extraction behaviors of nanosized Co-Sn intermetallic compounds

Preparation of Li2SnO3 and its application in lithium-ion batteries

Synthesis of Sn/C Nanocomposites and Their Electrochemical Performances As Anode Materials of Li-ion Battery

Preparation of SnO Nanoshells with Enhanced Lithium-Storage Properties.

Preparation And Li-Storage Properties Of Snsb/Graphene Hybrid Nanostructure By A Facile One-Step Solvothermal Route

Solvothermal Synthesis and Electrochemical Performance of Nano-Ni3Sn2 Used As Anodes for Lithium-ion Batteries

Sonochemical Synthesis of SnO2 Nanoparticles and Their Preliminary Study As Li Insertion Electrodes

Electrochemical Performance Studies of Tin Oxide Prepared by Sol-Gel

Chemical Prelithiation/Presodiation Strategies Toward Controllable and Scalable Synthesis of Microsized Nanoporous Tin at Room Temperature for High‐Energy Sodium‐Ion Batteries

Large-scale low temperature fabrication of SnO2 hollow/nanoporous nanostructures: the template-engaged replacement reaction mechanism and high-rate lithium storage.

Solvent Engineered Synthesis of Layered SnO Nanoparticles for High-Performance Anodes

Synthesis of hierarchical Sn/SnO nanosheets assembled by carbon-coated hollow nanospheres as anode materials for lithium/sodium ion batteries

Large-scale Synthesis of SnO2 Nanosheets with High Lithium Storage Capacity.