Abstract:A series of polyethylene (PE) blends consisting of a linear high density polyethylene (HDPE) and a linear low density polyethylene (LLDPE) with an octane-chain branch density of 120/1000 carbon was prepared at different concentrations. The two components of this set of blends possessed isorefractive indices, thus, making it difficult to detect their liquid–liquid phase separation via scattering techniques. Above the experimentally observed melting temperature of HDPE, Tm = 133 °C, this series of blends can be considered to be in the liquid state. The LLDPE crystallization temperature was below 50 °C; therefore, above 80 °C and below the melting temperature of HDPE, a series of crystalline–amorphous PE blends could be created. A specifically designed two-step isothermal experimental procedure was utilized to monitor the liquid–liquid phase separation of this set of blends. The first step was to quench the system from temperatures of known miscibility and isothermally anneal them at a temperature higher than the equilibrium melting temperature of the HDPE for the purpose of allowing the phase morphology to develop from liquid–liquid phase separation. The second step was to quench the system to a temperature at which the HDPE could rapidly crystallize. The time for developing 50% of the total crystallinity (t1/2) was used to monitor the crystallization kinetics. Because phase separation results in HDPE-rich domains where the crystallization rates are increased, this technique provided an experimental measure to identify the binodal curve of the liquid–liquid phase separation for the system indicated by faster t1/2. The annealing temperature in the first step that exhibits an onset of the decrease in t1/2 is the temperature of the binodal point for that blend composition. In addition, the HDPE-rich domains crystallized to form spherulites which decorate the phase-separated morphology. Therefore, the crystal dispersion indicates whether the phase separation followed a nucleation-and-growth process or a spinodal decomposition process. These crystal-decorated morphologies enabled the spinodal curve to be experimentally determined for the first time in this set of blends.

Rheological Properties of Liquid-Solid Transition in Isothermal Crystallization for High-Density Polyethylene

Rheological Behavior of Isothermal Crystallization for High-Density Polyethylene

Studies on Nonisothermal Crystallization of Ultra–high Molecular Weight Polyethylene in Liquid Paraffin

A NOVEL APPROACH TO RHEOLOGICAL CHARACTERIZATION FOR THE GELATION IN POLYMER CRYSTALLIZATION

Shear Induced Crystallization of High-Density Polyethylene

In Situ Fourier Transform Infrared Spectroscopic Study of the Conformational Changes of High‐density Poly(ethylene) During the Melting and Crystallization Processes

Effect of small amount of ultra high molecular weight component on the crystallization behaviors of bimodal high density polyethylene

Prediction of the Flow‐induced Crystallization in High‐density Polyethylene by a Continuum Model

Liquid–liquid Phase Separation in a Polyethylene Blend Monitored by Crystallization Kinetics and Crystal-Decorated Phase Morphologies

Effect of substrates on crystallization of high density polyethylene

Understanding structure-mechanics relationship of high density polyethylene based on stress induced lattice distortion

Nonisothermal Crystallization Kinetics of Ethylene-Butene Copolymer/Low-Density Polyethylene Blends

Effects of combined melt stretching and fast cooling fields on crystallization of high-density polyethylene

Rheological scaling and modeling of shear-enhanced crystallization rate of polypropylene

Towards a better understanding of the crystallization and melting behaviors of high-density polyethylene samples prepared from quasi-isothermal and stretching oriented localized melts

Probing Liquid‐Liquid Phase Separation of a Polyethylene Blend with Thermal Analysis

STUDY ON CORRELATION BETWEEN RHEOLOGICAL AND CONDUCTIVE BEHAVIOR THROUGH SIMULTANEOUS MEASUREMENTS DURING ISOTHERMAL CRYSTALLIZATION FOR CARBON BLACK FILLED ISOTACTIC POLYPROPYLENE

Abnormal Crystallization Behavior of High Impact Polypropylene under Shear

Crystallization Rates of Moderate and Ultrahigh Molecular Weight Polyethylene Characterized by Flash DSC Measurement

The non-equilibrium phase diagrams of flow-induced crystallization and melting of polyethylene.

Compressive Properties and Constitutive Model of Semicrystalline Polyethylene.