The Preparation and Properties of Polyethersulfone Capsule Carriers with Porous Membranes for Microbial Immobilization

Guang-jin WANG,Liang-yin CHU,Wen-mei CHEN,Ping YANG,Ming-yu ZHOU

DOI: https://doi.org/10.3969/j.issn.1009-3087.2005.03.011

2005-01-01

Abstract:Polyethersulfone porous capsule carriers were prepared with a gel-sol phase inversion method. The mean diameter of the capsule carriers was about 2 mm, and the capsule membranes were full of straight finger pores. The pore size distribution was narrow and the median pore diameter was 13.6 μm. The outer and inner surfaces of the capsule carriers were rough. The capsule carriers had large total pore volume, total pore area and porosity (as large as 91.7%). In the anaerobic wastewater biotreatment process, the biogas production rate with the porous capsule carriers was higher. than that with matrix-type porous polymeric carriers, and that without any carriers was the lowest. In a period of 31 days, the cumulative biogas volume produced in the wastewater biodegradation process with the porous capsule carriers was 881 ml, and those with matrix-type porous polymeric carriers and without any carriers were 715 ml and 517 ml, respectively. Immobilized anaerobic microbial cells were also found both inside the membrane pores and in the inner spaces of capsule carriers. The porous capsule carriers were proven to be efficient for the microbial immobilization under both aerobic and anaerobic conditions.