Abstract:As one of the indispensable actuating components in micro-systems, the shafted microgear is in great production demand. Microforming is a manufacturing process to produce microgears to meet the needs. Due to the small geometrical size, there are uncertain process performance and product quality issues in this production process. In this study, the shafted microgears were fabricated in two different scaling factors with four grain sizes using a progressively extrusion-blanking method. To explore the unknown of the process, grain-based modeling was proposed and employed to simulate the entire forming process. The results show that when the grains are large, the anisotropy of single grains has an obvious size effect on the forming behavior and process performance; and the produced geometries and surface quality are worsened; and the deformation load is decreased. Five deformation zones were identified in the microstructures with different hardness and distributions of stress and strain. The simulation by using the proposed model successfully predicted the formation of zones and revealed the inhomogeneous deformation in the forming process. The undesirable geometries of microgears including material unfilling, burr and inclination were observed on the shaft and teeth of gear, and the inclination size is increased obviously with grain size. To avoid the formation of inclination and material unfilling, the punch was redesigned, and a die insert was added to constraint the bottom surface of the gear teeth. The new products had then the better forming quality.

Study on precision isothermal micro forming technology of aluminum alloy micro-gears

Experimental Study on Effect of Thermal Deformation Parameters on Forming Process of Microgears

Research on Microforming Technology of Microgears

Study on compound fabrication process of micro double gears using microforming

Micro -Parts Massive Production Technology Based on Micro -Forming

Effect of Holding Time on the Extrusion Force and Microstructure Evolution during the Plastic Forming of Ti-6Al-4V Micro-Gears

Numerical and Experimental Study on the Rheo-Extrusion Process of 2A50 Aluminium Alloy Miniature Gear

Metal Flowing and Microstructure Characteristics of the Micro Inner Gear Ring Fabricated by Rheological Extrusion

Study on isothermal precision forging technology for a cylindrical aluminium-alloy housing

Hybrid Micro-forming Processes and Quality Evaluation of Micro-double Gear

Research On Micro-Forming Process Of Aluminum And Its Alloy

Research on the Precision Microforming Apparatus

Finite element simulation and experimental investigation of forming micro-gear with Zr–Cu–Ni–Al bulk metallic glass

Sustainable Production of Micro Gears Combining Micro Reciprocated Wire Electrical Discharge Machining and Precision Forging

Size effects on process performance and product quality in progressive microforming of shafted gears revealed by experiment and numerical modeling

Hybrid Forging Processes of Micro-Double Gear Using Micro-Forming Technology

Research on Forming Processes of Microgears with Floating Micro-Die

Isothermal precision forging process of aluminum alloy cylindrical housing

Digital Design of Isothermal Precision Forming of Complex Disk Forging

Isothermal precision forging of complex-shape rotating disk of aluminum alloy based on processing map and digitized technology

Fabrication of Micro Gear with Intact Tooth Profile by Micro Wire Electrical Discharge Machining