Abstract:BackgroundSupport vector machine (SVM) modeling is a machine-learning-based method. It involves a training phase with associated input and a predicting phase with target output decision values. In recent years, the method has become increasingly popular. The aim of this study is to carry out prediction of earthquake-induced landslides distribution in the area affected by the April 20 2013 Lushan earthquake based on GIS and the SVM model.The current study was undertaken to investigate the prevalence of Impaired Fasting Glucose (IFG)/Type 2 Diabetes (T2D) and its risk factors in the adult population in Biyem-Assi-Yaoundé, Cameroon.ResultsA detailed inventory map containing 1289 landslides triggered by this earthquake was produced through interpretation of colored aerial photographs and extensive field surveys. Elevation, slope angle, slope aspect, land cover, distance from co-seismic faults, peak ground acceleration and geology unit were selected as the controlling parameters. Cross validation with grid search method were used to search the best modeling parameters. A grid cell size of 60 × 60 m was adopted to produce the landslide susceptibility maps. The study area was divided into 186175 grid cells and each grid consisted of seven layers representing the controlling parameters. 70% of the total landslides (1782 grid cells) were used as positive training samples and 1782 randomly selected points on the stable slopes were treated as negative training samples in concert with four kernel functions: linear, polynomial, radial basis function and sigmoid. These results were further validated using area-under-curve (AUC) analysis of success-rate curves and prediction-rate curves. Comparative analyses of landslide-susceptibility and area relation curves show that both the polynomial and radial basis function suitably classified the input data of both training dataset and validating dataset, though the radial basis function was a bit more successful in success rate curves. Four cases of landslide susceptibility were mapped. The generated landslide-susceptibility maps were compared with known landslide. About 20%-30% of the study area 26 (Linear 34.78%, Polynomial 30.49%, and radial basic 23.83%) was categorized into high and very high susceptible zones during the Lushan earthquake, containing more than 70% occurrence of landslides triggered by the earthquake (Linear 74.16%, Polynomial 85.32%, and radial basic 86.71%). However, in maps with sigmoid function, 62.27% of the area was found to be highly susceptible to landslides during the earthquake with almost the entire landslides occurrence.ConclusionMost of the high susceptible and very high susceptible area was concentrated along the seism genic faults with a PGA of more than 0.52 g. This paper provide an example for selecting appropriate types of kernel functions for prediction mapping of seismic landslides using support vector machine modeling. The susceptibility maps for earthquake-induced landslides can be useful in landslide hazard mitigation by helping planners understand the probability of landslides in different regions.

SUPPORT VECTOR MACHINE MODEL FOR PREDICTING SAND LIQUEFACTION

Support Vector Machine Model of Settlement Prediction of Road Soft Foundation

Failure Mechanisms of Sand under Asymmetrical Cyclic Loading Conditions: Experimental Observation and Constitutive Modelling

SUPPORT VECTOR MACHINE MODEL IN SLOPE STABILITY EVALUATION

Research on Prediction Model of Support Vector Machine Based Land Subsidence Caused by Foundation Pit Dewatering

Integrating the LSSVM and RBFNN models with three optimization algorithms to predict the soil liquefaction potential

Preliminary Discussion on Flood Forecast Model Based on Support Vector Machine

Liquefaction prediction with robust machine learning algorithms (SVM, RF, and XGBoost) supported by genetic algorithm-based feature selection and parameter optimization from the perspective of data processing

Numerical Modelling of Liquefaction in Loose Sand Deposits Subjected to Ocean Waves

Study of Data-Driven Methods for Predicting Soil Liquefaction-Induced Lateral Displacement

Volumetric Error Prediction and Compensation of NC Machine Tool Based on Least Square Support Vector Machine

Performance evaluation of hybrid GA–SVM and GWO–SVM models to predict earthquake-induced liquefaction potential of soil: a multi-dataset investigation

Prediction of landslide displacement based on GA-LSSVM with multiple factors

Study of Support Vector Machine and Its Application in Concrete Strength Prediction

Predicting earthquake-induced soil liquefaction based on a hybridization of kernel Fisher discriminant analysis and a least squares support vector machine: a multi-dataset study

Application of Improved Support Vector Machine in Predicting Failure Pressure of Oil and Gas Pipelines with Internal Corrosion Defects

A Hybrid Machine Learning Model Coupling Double Exponential Smoothing and ELM to Predict Multi-Factor Landslide Displacement

Investigating a hybrid extreme learning machine coupled with Dingo Optimization Algorithm for modeling liquefaction triggering in sand-silt mixtures

The adoption of a support vector machine optimized by GWO to the prediction of soil liquefaction

Linear and non-linear SVM prediction for fresh properties and compressive strength of high volume fly ash self-compacting concrete

Support vector machine modeling of earthquake-induced landslides susceptibility in central part of Sichuan province, China